84 tecate- kips style 500

[dirty daniel]

has anyone put in a kips style 500 motor from a kx into a 84 t3, i have entire donor bike if i need to do surgery on the baskets, but is the spaceing and size on the rear bolt the same so the sproket lines up?
and what do you do about air cleaner/exaust pipe?

[fabiodriven]

The motor bolts into the frame, the swinger bolt should go through fine. The sprocket lines up too. Air filter and pipe are up to you. You have to cut the front down tube of the frame and build something because the exhaust port of the 500 motor comes directly out the front of the jug, right where the front down tube is.