rebuilding 350x rear shock question

[blkstangman88]

does anyone have or know how to rebuild the rear shock on a 350x? ive gathered i need to send it somewhere for rebuild from what ive seen but id rathe do it myself if possible.

[badass350x]

Let the pro's take care of it!!!!!

[sp8twn]

i agree with badass,,,,,Let the pro's take care of it!!!!!

[blkstangman88]

sweet, well who would come recommended? id like to powder coat it all black and get a new coil also.

[badass350x]

There is a guy on ebay doing them, do a search he should pop up! Shoot a few messages too him, heard some good things about his work.

[murfman]

This is an Email I received from Works Performance about the 350x shock:
Labor is included. Shock shaft must be in serviceable condition. If the shaft is not serviceable, see Guts Upgrade Cartridge costs listed below.
.
The Heart Transplant includes the installation into your factory shock of a complete 6 stage compression damping piston assembly with valving specific to your weight and riding style and gas and oil service. Does not include seals or shaft bushing. Replacement costs (if required) are:

Seal replacement (incl seal) $69.00
Shaft bushing replacement, $58.00



"GUTS" UPGRADE CARTRIDGES FOR STOCK SINGLE SHOCKS
Standard cartridge (not rebound adjustable), installed $389.00
Rebound-adjustable cartridge, installed $499.00
Replacement, or upgrade spring, From: $110.00
Cartridges include: complete piston assembly, shaft, seals and seal holder, bumper, eye or clevis, appropriate spring retainers and gas and oil service .

[murfman]

I noticed that my last post did not show the price of a "Heart Transplant" It is 239.00

[murfman]

I found a local guy that does oval track shocks for cars, and has been doing some shock work for Rousch racing and a couple of Trophy Trucks for Baja as well. He is going to expand into the motorcycle and ATC/V market. I am dropping off my shock tomorrow morning. I will let you know what I find out.

[CRAZY70MAN]

sblt500r here on the board does them if I am correct. That seems steep in price...240.00?? Mine was way less than that at atv shop.....

[atc007]

I've been in this business over 23 years,{Atv/SLEDS/ Motorcycle} I made a decision early on,,to send ALL of my cranks,and shocks out. I am only One man,,was also running a dairy farm,and did not have time to be doing it ALL. So,,While I very much apprecieate the time,tools,and knowledge to rebuild shocks,,,the pricing has almost always sickened me!! Obviously,,you'd have to be very desperate,at the least,,to send it packing to Works at those prices!! It basically COSTS,,under $20 for whoever is doing the shock,,PLUS their labor,,which has to be at LEAST a $50 bill. Anything over that is ,,well,,,,depending on the shock,I suppose,,,,greedy. Again,no offense to those doing them. They are a tarry,greasy,nasty mess inside!! But these guys have the shock table,degreasers and equipment to deal with it professionally. And because of the continous greed,,,NO,,I don't have a SINGLE one I can recommend!! Sad,but true. My buddy was set when he had his Arctic Cat shop,,and after YEARS of me pushing,,he got the stuff,, He charged me $29,for a oil change and charge. $39 if it needed a seal..And when they sold out,,it went before I could get it!! Otherwise,,I would have the goodies! Murf,,let us know how your deal works out!!

[nicker71]

I send my shocks to Dirtwork motosports, they can put new seals in it and change the oil and recharge it. None of the custom stuff though on these old shocks. All dirtworks does is atv stuff, mostly XC racing. Very knowlegdeable, and easy to talk to. http://www.dirtworksmotorsports.com/

[pantera1975]

http://www.3wheelerworld.com/showthr...ighlight=ninja post #5 I had Ninja do my 86 250R shock its is awesome! Rebuilt it and got a Elka spring to match my riding style and weight. Highly recommend him. He is usually busy.

[just ben]

I do my own for under 50.00. If you just want a stock rebuild, it's pretty easy to do with a bench vise and a few hand tools.

[murfman]

I was quoted 50.00 for my 350x shock. I dropped it off today, he said it may take a while as he will have to order the seals etc... I will keep you posted. Brian definitely knows his chit. He is a very personable guy, best of all he is 15 minutes from my house. I also picked up some fully synthetic lube for my front forks from him as well. He does not have a website, but I found this:

http://www.racestarpublications.com/simplysusp.html

[atc007]

I do my own for under 50.00. If you just want a stock rebuild, it's pretty easy to do with a bench vise and a few hand tools.

You make it sound so easy Ben! How do you charge them? The rest I understand.