At The Back Of The Pack
Arm chair racerAt the back of the pack
OK. So i got a PWK 36mm carb , got the Honda 250R cable . It seems like the cable is just to short , won't let the slide drop all the way down. First picture is cable pulled all the way through the pwk carb cap, second picture is of the carb. Any help ?
Thanks
Loves Corn.
Catch me if you can
whats the carb from? whats the cap from? wrong cap and cable...
Loves Corn.
Catch me if you can
http://www.ebay.com/itm/Honda-ATC250...item3cb4e18368
thats the cable.... you need... and this is the cap... and #1 through #4 http://www.sudco.com/pj_diagram.html pretty simple..
At The Back Of The Pack
Arm chair racerAt the back of the pack
I picked the carb up off ebay as a whole , so where this and that came from i have no idea. I figured it was a stock pwk carb not modded in any way shape or form. I thought you said any honda 250R cable would work so i got a 85 honda 250R motion pro cable . As far as the cap , I dont have any idea. I am getting so sick of ebay , the last 4 or 5 items i ordered from there have been jacked! I posted the pictures because it wasn't working out , I dunno .
At The Back Of The Pack
Arm chair racerAt the back of the pack
Raffa Thanks for all your help , My mistake. I reRead a previous post and I guess i need to follow directions better .
Loves Corn.
Catch me if you can
Hey no problem...just glad I didnt have to rip my bike apart for the 68th time....to take a picture...
At The Back Of The Pack
Arm chair racerAt the back of the pack
I didn't run into this problem when putting the 35mm keihin on my 84R , well because it already had the cable that would work. lol
Reply With Quote