Results 1 to 7 of 7

Thread: TRI Z 250 how much tranny fluid???

  1. #1
    Join Date
    Oct 2003
    Location
    potsdam NY (upstate)
    --
    1,437

    TRI Z 250 how much tranny fluid???

    i just got my tri z 250 and it runs perfect i just have been doing a toon up on it, pressure washed the whole thing flushed the radiaters new plug and now im going to change the tranny fluid how much should i put in itounce i drain it and what shoul di use for tranny fluid in it. last night i had to quickly mix up soem anti freeze for the beast case it was going to get below freezing.
    looking for a TRI-Z 250 to restore at the moment

    LONG LIVE THE 2 STROKES !!!

  2. #2
    slippy4 is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    May 2003
    --
    556
    if you go to 3wheelerworld home page and go to specs it tells you there. i think its like 1.5 or so quarts. you can just use normal motor oil 5wt or so dont go too heavy otherwise your clutch wont disangage prop. i heard mix opinions about using regular tranny fluid in it. there was a post somewhere about it but im tired and want to get to bed. good luck and post some pics of it.
    85 Tri-z
    38mm Flatslide
    Boysen Power Reeds
    DG Pipe and Silencer
    Bored 1.25mm over
    Wiesco Pistion and Rings
    K&N Clamp on Filter
    Compleating Restoration

  3. #3
    Join Date
    Jan 2003
    Location
    Ashland City, TN
    --
    2,576
    Take out the little screw on the side, add oil until it comes out the screw hole.
    Trikes:
    1973 Honda ATC70-orange!
    (2)1985 ATC70
    1985 Big Red 250
    1985 250R

  4. #4
    Join Date
    Oct 2003
    Location
    potsdam NY (upstate)
    --
    1,437

    thanks

    thanks i forgot all about the specs page ill get soem pics of the beast tomorow for yah .
    looking for a TRI-Z 250 to restore at the moment

    LONG LIVE THE 2 STROKES !!!

  5. #5
    Join Date
    Dec 2002
    Location
    Missouri
    --
    946
    Umm Tranny Fluid? As in Auto car tranny fluid.. I would use soem oil, not fluild...
    06 TRX450r , 85 ATC250r, 01 TRX300ex, 84 ATC110
    88 Mustang GT

  6. #6
    Join Date
    Oct 2003
    Location
    potsdam NY (upstate)
    --
    1,437

    lol

    lol i know what to use
    looking for a TRI-Z 250 to restore at the moment

    LONG LIVE THE 2 STROKES !!!

  7. #7
    Join Date
    Dec 2002
    Location
    Missouri
    --
    946

    Re: lol

    Quote Originally Posted by TRI-Zbrian
    lol i know what to use
    Was worried about you there
    06 TRX450r , 85 ATC250r, 01 TRX300ex, 84 ATC110
    88 Mustang GT

//ArrowChat Integreation Code //