At The Back Of The Pack
Arm chair racerFirst time rider
Ok so my 200x will start it will run but when u give it gas under load it don't want to move. Plus it wont idle on its own have to put the idle screw up alot makes it sound likes its screaming or its not enough. its an 1985 200x Bord 60 over thinking about cleaning it fully and hope that works and ideas will help me in any way thanks.
85 200x Bord 60 over top end DG Full pipe
My Feedback http://www.3wheelerworld.com/showthr...k-for-youngjay
Power User
The day begins with 3WW
Jets are clogged !!!!!!! Buy a kit
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
At The Back Of The Pack
Arm chair racerFirst time rider
figured thanks mate =]
85 200x Bord 60 over top end DG Full pipe
My Feedback http://www.3wheelerworld.com/showthr...k-for-youngjay
Power User
The day begins with 3WW
x2 w/ sl.
I also wonder where the 200 gets it's spark advance from.
Is there a plate that rotates with spring return that may be stuck?
Clean jets AND internal passages.
They come off and apart so easily.
You may not even need a kit but best to have on hand before disassembly.
just in case.
Got The Holeshot
Arm chair racerJust too addicted
you can get a new carb (I have used two of them with great success ) almost as cheap as a kit
Last edited by KILLER; 54 Minutes Ago at 06:17 PM. Reason: beer
Reply With Quote