I have an 84 trike ive been workin on back and forth. I fully rebuilt the engine lower and top end. The problem is the bike simply wont start. Its getting a nice bright blue spark and plenty of gas. The carb has been fully cleaned and gone over. Im thinking maybe its an ignition timing issue. The manual states that the f mark on the mag should line up with the notch at 2,000 rpm but I cannot test this is the bike isnt running. Ive tried the basic tricks from putting a little gas in the cylinder. The plug comes out not soaked but its ovious gas has been getting to it after a few kicks. Can anyone put there .2 cents in?
Reply With Quote