85 toolbox pics for Billy

[Vealmonkey]

Here's the toolbox pics. I hope this is cherry enough. Billy, you better be careful with this. It took almost 2 years to find all the parts to make this toolbox! LOL Seriously though.

[Swinger]

Cherry enough??? Cmon Veal, you probably had this stashed still in the box for a rainy day. That is nice man!!!!

[Vealmonkey]

It's been on the shelf, but each piece was bought seperate. Even the latch and pin that holds it in place were 2 seperate pieces. I didn't post pics of the tools or the foam. I would like to see that 350x jet kit in the other tool box though.

[Swinger]

Now thats dedication right there!! That is a lot of scouring around for such small things. Great job bud!

[Vealmonkey]

The only used parts were the mounts, which took me time to find as well. Had to get a used toolbox or 2 to get those and have the 86 mounts as well. And the 85 and 86 tools are different as the toolboxes are different, mainly being the shock wrench for the 85 and none for 86. The shock wrench is a really sweet tool to have. And even though it shows the air gauge, I've never seen a toolset that came with the gauge. And I've had a couple different nos tool sets, both 85 and 86 350x and 250r.

[Billy Golightly]

Between that one and the one Steve loaned out I think this can be pulled off Will keep you guys informed. PM incoming Veal.