//ArrowChat Code
Results 1 to 6 of 6

Thread: I need a seat pan please !!!

  1. 01-18-2012, 04:23 AM #1
    Honda_ATC's Avatar
    Honda_ATC
    Honda_ATC is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Apr 2011
    Location
    Superior WI
    --
    92

    I need a seat pan please !!!

    I have been looking everywhere for a 81-83 honda 185s seat pan I cannot find one anywhere!!! I know about the fiberglass tricks and all... to my dissapointment the pan is just way to far gone.... My last attempt will be to build a new one.. Hopefully someone has one I could buy from them!! I looked all over ebay and the internet cannot find them any help would be great!!!!
    Trikes (sold)
    1984 200s
    1982 185s
    1983 200x (Bought her back ) (now sold again)
    1984 200x
    1981 185s
    own currently
    1985 250sx
    1983 185s (2)
    1982 185s
    Mini bikes
    1979 KV 75

    "If the world ended all that would be left is trail pros"
    Reply With Quote Reply With Quote
  2. 01-18-2012, 05:14 AM #2
    DasUberKraut's Avatar
    DasUberKraut
    DasUberKraut is offline Roostin' Away Arm chair racerRoostin Away
    Join Date
    Jul 2011
    Location
    Eau Claire, WI
    --
    1,188
    A guy could make a million bucks if he was reproducing seat pans.
    Reply With Quote Reply With Quote
  3. 01-18-2012, 08:04 AM #3
    nyshawn
    nyshawn is offline New to the board Arm chair racerNew to the board
    Join Date
    Jan 2012
    Location
    georgia usa
    --
    14
    i have the same problem, whats the fiberglass trick my yt125 seat pan is rusted pretty bad in some spots and i cant staple my new fabric to metal, i searched for a seat for you on ebay and found a seller who said he was parting out his complete 185s and he had alot of parts not listed you could ask him if he sold the seat yet, his ebay name is 360ed.
    Reply With Quote Reply With Quote
  4. 01-18-2012, 10:56 AM #4
    muthey's Avatar
    muthey
    muthey is offline Power User Roostin Away
    Join Date
    Jul 2010
    Location
    glendive, montana
    --
    1,822
    check this place out the guy who owns it is pretty cool not sure why he is out of stock on them right now but if you contact him and ask he will respond and let you know what's up. http://www.atcheaven.com/Seats.php?p...talRows_Sea=36
    Reply With Quote Reply With Quote
  5. 01-18-2012, 11:36 AM #5
    rodeofan5656's Avatar
    rodeofan5656
    rodeofan5656 is offline Girlfriend wishes I'd last longer than 8 seconds Arm chair racerAt the back of the pack
    Join Date
    Dec 2011
    Location
    Park City, KS
    --
    389
    just an idea..... can you make one outta sheet metal that'll fit? not sure what the pan looks like. but if its basic enuf, it shouldnt be too hard to make one. can you post a picture of how bad it is?



    1986 Honda ATC200X
    2005 Yamaha Road Star 1700
    ToyHauler- 1998 Ram 3500 5.9L Turbo Diesel
    Reply With Quote Reply With Quote
  6. 01-18-2012, 11:18 PM #6
    Honda_ATC's Avatar
    Honda_ATC
    Honda_ATC is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Apr 2011
    Location
    Superior WI
    --
    92
    The best way to staple the fabric to the metal is go to a hardwear store and buy some heavy duty staples then drill through the pan and put the staples through and bend them in the back, do it all the way around works great!
    Trikes (sold)
    1984 200s
    1982 185s
    1983 200x (Bought her back ) (now sold again)
    1984 200x
    1981 185s
    own currently
    1985 250sx
    1983 185s (2)
    1982 185s
    Mini bikes
    1979 KV 75

    "If the world ended all that would be left is trail pros"
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //