wondering how you could tell if a cam is not stock.top end was out of the machine when i got it.was told the cam was aftermarket but not sure.anyway to know by looking at it.here are some pics let me know what you think thanks.
Got The Holeshot
Arm chair racerJust too addicted
wondering how you could tell if a cam is not stock.top end was out of the machine when i got it.was told the cam was aftermarket but not sure.anyway to know by looking at it.here are some pics let me know what you think thanks.
Got The Holeshot
Arm chair racerJust too addicted
did not see any numbers on it.
Got The Holeshot
Arm chair racerJust too addicted
best way to tell is if you got a stock cam and you put it next to it. Not all cams are equal as some will open the valve sooner and more. Some wont. If you had a stock cam hold it need to this one and look at your lobes to see if its fatter or taller than the stock one. Other than that there is not really a way to tell just by looking at it.
85 ATC 250r -Under Construction
86 TRX250r
05 KFX400
02 400EX
Got The Holeshot
Arm chair racerJust too addicted
do not have a stock one to compare it to.
Got The Holeshot
Arm chair racerJust too addicted
does anyone have stock measurements of the height on the lobes
Just Too Addicted: Protecting Our Community
The day begins with 3WW
From the Honda manual:
Intake: 1.2739-1.2802
Exhaust: 1.2615-1.2678
If they aren't the same, please post your results.
Got The Holeshot
Arm chair racerJust too addicted
cool thanks will have to take it to my buddies shop and check it out.
Reply With Quote