is any one out there running a new water cooled 250r piston in their 300r??
New to the board
Arm chair racerNew to the board
is any one out there running a new water cooled 250r piston in their 300r??
Power User
Roostin Away
I dont personally, but I know of a few around here who are. There is some machining involved to the head and the cylinder, a deck mod, and is either on the top of the jug or the bottom. They shave off a few mm's from what I remember. There is tons of info and people running them over at air foolers dot com . ------- Jon.
THE 80's RAGE! Currently owns:
81, 85 Yamaha Tri Moto 125
83 Yamaha Tri Moto 200 x2
82,83 Yamaha Tri Moto 175 project
85 Yamaha Tri Z 250
84 Kawasaki Tecate 250
84 Honda ATC 70
85 Honda ATC 350X
84 Honda ATC 250R
(2) 84 Honda ATC 200x
82, 83 Honda ATC 185s
81 ATC 200
Lots of other parts and bikes
Just Too Addicted
Arm chair racerJust too addicted
If you want to do this mod you need to talk to Denny Mears at Flotek. He done mine and it is a hand full.http://flotekperformance.com/home
Power User
Roostin Away
theres a couple threads on air foolers dot com about it. theres Larry at racers toystore and Denny at Floteck to name a couple. its relatively popular with the 300 dudes cuz those cast hondaline pistons are tough to find and silly expensive. good luck
Reply With Quote