How many balls go in a 1983 honda front forks top and bottom?
I think it's 16 but I thought I would ask the pros!!!
Here
amd here
Power User
Roostin Away
How many balls go in a 1983 honda front forks top and bottom?
I think it's 16 but I thought I would ask the pros!!!
Here
amd here
Last edited by tulsamike3434; 03-29-2012 at 08:01 AM.
My ridez 110,110, Big Red, 185s, 70, 200, 250r!!!!
REQUEST YOUR ATC PART'S @ The 3 & 4 Wheeler Emporium
Power User
Roostin Away
From what I read it called a "COLLAR, REAR" but now that I have it all clean with no greade Im not sure how to get the grease back in
My ridez 110,110, Big Red, 185s, 70, 200, 250r!!!!
REQUEST YOUR ATC PART'S @ The 3 & 4 Wheeler Emporium
The Enthusiast.
Teaching quads a lesson
19 should be the magic number. I smear grease on the bottom race, then set the bearings in the grease... keeps them in place. After you slide the neck in, do the same up top.
Power User
Roostin Away
Thank's sp much the reason I said 17 was because that's the number pulled out of the top and bottom I wonder if that's a stock thing.....Originally Posted by atc350xer
My ridez 110,110, Big Red, 185s, 70, 200, 250r!!!!
REQUEST YOUR ATC PART'S @ The 3 & 4 Wheeler Emporium
First Time Rider
Arm chair racerNew to the board
Yep. When you thread on the adjuster/top cone and locknut, take your time and get it set right. When it's right, there will be no slop in the headset, but it will turn to full lock in both directions under it's own weight (with the front tire off the ground).
TRX 70 - rescued from the trash
84 125m - first restoration
84 200m - now a four wheeler with 450r suspension
84 200x - restored, now my rider
83 250r - current project
Looking for an FL350 (Odyssey)
At The Back Of The Pack
Arm chair racerAt the back of the pack
just buy new all balls.... much nicer.
Just Too Addicted
Arm chair racerJust too addicted
And nO taking it apart later and losing them. Its a better system and holds grease better. I linked to it in your thread.
Reply With Quote