View Poll Results: Should it be tricked out or not?

Voters
64. You may not vote on this poll
  • Exhaust & K&N

    6 9.38%
  • Works Shocks

    0 0%
  • Highlifter Disk Brakes

    2 3.13%
  • Worse than a 4 wheel conversion!

    3 4.69%
  • Not that bad, but still sad.

    9 14.06%
  • The Boston Red Sox

    5 7.81%
  • The New York Yankees

    5 7.81%
  • great!

    2 3.13%
  • works ok

    5 7.81%
  • find new or good used parts

    5 7.81%
  • da hell wit it respray the plastic custom

    10 15.63%
  • yes

    8 12.50%
  • no

    4 6.25%
Results 1 to 4 of 4

Thread: Atc 70!!!!!!

  1. #1
    Join Date
    Jul 2003
    Location
    Ontario Canada
    --
    813

    Atc 70!!!!!!

    hey, i liked seeing that tricked out ATC 70 on here, the one with green fenders, white seat and darker green flames, i posted a while back about a custom wheeler, thats what i am going to do, i need all the pics of an ATC 70, tricked out or not, and then i am goin to design, build, and trick out this little trike, but! the big thing about this project is, remeber the old tri moto's with the 175 2 stroke that can keep up to a 200X?? i got one them i am puttin in it, can we all say "wheelie beast"??

    Curtis
    Currently Trikeless- but I have a LT250R

  2. #2
    Join Date
    Nov 2003
    Location
    Houston,Texas
    --
    1,044
    sounds like a good idea.I'm with you all the way,every machine deserves to be tricked out,wether your putting a pipe on a stock 250r or replacing engine(like your doing).I gonna get a basket case honda 125 in the next few days.I'm thinking about dropping a bigger motor in it and use it for racing.any ideas on a powerhouse motor that would fit with out to much cutting on the frame? thanx

  3. #3
    Join Date
    Apr 2003
    --
    132
    I'm all for keeping the 70's stock, NOT. Just kidding. Mines the yellow/purple full suspension on the home page "Mini Me"

    I'm doing one right now with a built 125M motor.

  4. #4
    Join Date
    Jul 2003
    Location
    Ontario Canada
    --
    813
    no one have pics? i looked in the picture section of the site, and didnt see anything i could use to my advantage

    here are the pics i need

    1) good front veiw
    2) good view of bottom (like, machine on its rear so i can see skid plate and such)
    3)how the airbox goes
    4)if someone has a roller, where the motor mounts are and how they are welded on (like, where gussests are)
    5)good back veiw
    6)lots of different angles
    7)last but certainly not least, PEOPLE RIDING THEM!! if like, a 5 foot 7 or 8 person was riding one, how would it look? i am 5 foot 4 and would probaly do some kinda custom bars and seat arrangment


    Thanks alot!!!

    Curtis
    Currently Trikeless- but I have a LT250R

//ArrowChat Integreation Code //