New to the board
Arm chair racerNew to the board
Hey everyone, I have a mikuni VM 22 Carb from my 1985 225DX and I can't seem to unblock whatever is inside the fuel intake pipe, or something further inside the Carb. I've tried spraying Carb cleaner inside however it just shoots back out at me. I've also tried using compressed air which was able to get some of the crap out, however the pipe still isn't clear. Any suggestions of what I should do now?
Roostin' Away
Arm chair racerRoostin Away
Use a probe.
Power User
The day begins with 3WW
Try blowing it out from the other direction from the float valve . Let it soak if you need to .
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
At The Back Of The Pack
Arm chair racerFirst time rider
i would use a drill bit and turn it with your fingers to drill the crap out
1984 Honda 200M
1984 Honda 200M
1996 Yamaha 250 Timberwolf 4x4
1990+ Xingfu Hunter
1986 Suzuki SP200
New to the board
Arm chair racerNew to the board
Post a picture. Maybe that particular passage isn't what it seems, and if someone recognizes that carb they can confirm whether it should be clear.
New to the board
Arm chair racerNew to the board
I was able to unclog it, had to take off the bottom of the Carb, take off the float and then used compressed air in the cable where the small pin attached to the float goes. Hopefully it'll start now!
New to the board
Arm chair racerNew to the board
Good deal. Let us know how it worked out.
New to the board
Arm chair racerNew to the board
Will do, still waiting on an o-ring and a gasket but once they come in everything should work
New to the board
Arm chair racerNew to the board
just picked up and installed the new starter set and gasket on the carb and what do you know the thing started right up right away, all seems well now
Reply With Quote