'Bout got the 200x done and moving, but it could use a new chain and sprockets. I got a Dennis Kirk catalog and was wondering what a good brand chain to get and what sprockets would be a good setup for 22" tires.
At The Back Of The Pack
Arm chair racerAt the back of the pack
'Bout got the 200x done and moving, but it could use a new chain and sprockets. I got a Dennis Kirk catalog and was wondering what a good brand chain to get and what sprockets would be a good setup for 22" tires.
Check my feedback before buying from me
Arm chair racerJust too addicted
DID chain is good, or a cheap chain will work....12/40 is stock gearing...i run 13/40 on my 200x with 22'' tires, it has no problem pulling it either...still loves to wheelie!
At The Back Of The Pack
Arm chair racerAt the back of the pack
What year do you have? I've only got a 5-speed '84. A little more speed would be nice because I live in Iowa and well... it's flat.
At The Back Of The Pack
Arm chair racerAt the back of the pack
That my friends is a very very good question I also need answered too
Im running now 12 on front and 38 rear with 22's on back
I need both sprockets and chain my problem is stock on rear wont work as my axle is extended its a very different set up than stock as there is no sprocket hub that snap rings to the axle instead the rear sprocket bolts right on the axle as the sprocket holder is welded on axle I think my lil 200X was a flat tracker in another life
83 YTM 200,84 200X,,85 350X basket case,86 350X parts trike,86 350Xroller needs top end, 86 250SX,
Reply With Quote