First Time Rider
Arm chair racerNew to the board
hey my cousin jus got this old dirtbike. runs strong its an 82. very fast. but it doesnt have a monoshock. so was wondering if n e 1 knew how or if u coild take the swing arm off or w/e n the seperate shocks and put a knew set up on it?
u would probly hafta weld or and cut t make way for the new swing arm n shock postioning right . well thanx alot
Just Too Addicted
Arm chair racerJust too addicted
can't really understand your dialect.
Sam from Florida
1985 BIGRED $ 200X
First Time Rider
Arm chair racerNew to the board
hey my cousin just got this old dirtbike. runs strong its an 82. very fast. but it doesnt have a monoshock. so was wondering if anyone knew how or if u could take the swing arm off or w/e and the seperate shocks and put a knew set up on it?
you would probly have to weld or and cut it to make way for the new swing arm and shock postioning right . well thanx alot
First Time Rider
Arm chair racerNew to the board
a lil better....
Still searching for a
TR200 (fat cat)
BW200/350 (big wheel)
any trike yamaha or honda
The more trashed the better but must have a runing engine
First Time Rider
Arm chair racerNew to the board
o thanx but can anyone help me with my shock problem and not my english lol
Just Too Addicted
Arm chair racerJust too addicted
Why not try a set of works shocks on it?If you try to put a mono set up on it you will have to change the subframe,seat,rear plastic,all the mounts
for exhaust and any thing else that sits back there,the swingarm,rear
wheel and axle will be differint,frame would need modifyed to fit swing arm linkage,ect.ect.ect.It would be a pain in the trailprotrailprotrailprotrailprotrailpro.It might be easyer
and cheaper to buy a newer bike with a mono shock set up on it allready.
My friend has an older cr125 roller that is missing some motor parts.
You might be able to buy that and fit your motor to it.Would be easyer than fiting a mono on your bike.
Reply With Quote