At The Back Of The Pack
Arm chair racerAt the back of the pack
My neutral/reverse safety switch connector is all cracked up and in pretty bad condition. Does anyone know where I can get a new one for it? It is working as of right now, but I would like to have a new one on there for peace of mind due to the fact that I do alot of trail riding and dont want to have to push the bike a couple miles out of the woods if it finally cracks and falls off.
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
Power User
4 Wheels? Huh?
http://www.vintageconnections.com/
They have all the connectors you will find on these trikes.
---------------------------------------------------------
1984 Honda ATC200ES "Big Red"
1982 ATC200E "Hondie"
1988 TRX300FW "Project Quad" Still in progress....
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks, but I did not see what I'm looking for. I'm looking for the connection between the wire and the switch, not the connector between the harness and the sub-harness. I'm looking for number 24 on the microfiche. Its discontinued and I don't know where to get it.
http://www.hondapartshouse.com/home....Y14HA0FBHA055C
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
Power User
4 Wheels? Huh?
http://www.ebay.com/itm/1986-86-Hond...e064f6&vxp=mtr
Other than that one on ebay i have no idea. I don't have a 250ES here to look at to tell you what type of terminal it is and i can't find a good enough picture of one. I would guess its a crimp on terminal that could be found somewhere but i would have to see one.
---------------------------------------------------------
1984 Honda ATC200ES "Big Red"
1982 ATC200E "Hondie"
1988 TRX300FW "Project Quad" Still in progress....
At The Back Of The Pack
Arm chair racerAt the back of the pack
Yea i saw that earlier and I didnt see any other options so i just bought it.
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
Power User
Catch me if you can
I have an 85 ES cover that may have that portion; It also has a reverse wire connected nearby correct??
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
P3 Member ( RIP 8/15/2018 )
The day begins with 3WW
Get ahold of Howdy or Catptainweezy, between those two fellas I am sure one of them has what your looking for.
http://www.3wheelerworld.com/member....6-captainweezy
http://www.3wheelerworld.com/member.php/5-Howdy
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks guys i bought one off of ebay. If it dont work or is wrong I'll let you know.
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
The Enthusiast.
Teaching quads a lesson
A little tip for that switch... I put a small piece of styrofoam between it and the sheet metal cover... it'll never fall off if you do that.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks for the tip atc350xer.
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
Reply With Quote