I like where this project is heading. If you figure out chrome fenders, I want in!!! That motor looks awesome, Carlos at BDT does Great work. I've have mine 2 yrs and no problems.
First Time Rider
Arm chair racerNew to the board
I like where this project is heading. If you figure out chrome fenders, I want in!!! That motor looks awesome, Carlos at BDT does Great work. I've have mine 2 yrs and no problems.
Power User
Roostin Away
Simply Beautiful!!!
At The Back Of The Pack
Arm chair racerAt the back of the pack
I'm pretty proud of these I put a lot of work into them
Before
After
Last edited by fire1; 07-10-2012 at 06:17 PM.
Power User
The day begins with 3WW
And you're gonna Ride this????? Beautiful work !!
Please help those who cannot help themselves.
ALWAYS buying Museum quality machines,3 and 4 wheels. And any and ALL ,NOS parts,EVERY brand.
I am turning my PM's Off,my Email is billsracing@hotmail.com,put 3WW in the subject. Thanx!
Gun laws do not stop criminals. BULLETS do.
Power User
The day begins with 3WW
I do believe so. He's gonna try and bring it to the Sept. 8th ride at St. Joes if I remember correctly.Originally Posted by atc007
'86 ATC 250R, Build Thread http://www.3wheelerworld.com/showthr...highlight=250r
'86 "Factory Tri racing" Tri-Z http://www.3wheelerworld.com/showthr...b-Top-Tank-ect
Pile of Tecate Parts
My Feedback Thread: http://www.3wheelerworld.com/showthr...edback-for-bkm
Power User
4 Wheels? Huh?
do you guys do any clear over your polishing?? i would love to see some of this polished stuff with some clear powder shot on they must have some stuff out there by now that doesnt yellow too much on cure! even if it changes the hugh slightly i would probably be ok with it knowing it would never require polishing again!! Your project is looking stellar by the way!!
MY FEEDBACK THREAD- http://www.3wheelerworld.com/showthr...ight=aldochina
yaegerb
The day begins with 3WW
First Time Rider
Arm chair racerNew to the board
You can definately tell you put your time in on those calipers. Did you do all that by hand? Looks Great!
Power User
Roostin Away
this is beautiful!
Got The Holeshot
Arm chair racerJust too addicted
wow! what a beautiful job your doing
MY TRIKES!:
1- 85 250r NOS engine
1- 1985 350x
1- 82 250r + Parts
1- 86 250es Big Red
1- 85 200x
2- 84 200es Big Red
1- 84 200M !!MINTY!!
1- 73 Atc 70 (project)
MY Snowmobile's!!
1999 Polaris Indy 440
1999 Ski-Doo 583
1993 Polaris Indy 500
My Dirt Bike
1986 Dr100
AND A SCOOTER!! 1986 Honda Spree
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks everyone !!!! Yes I'm going to ride it but selective on where(like no mud ...lol)
At The Back Of The Pack
Arm chair racerAt the back of the pack
Very nice, cant wait to see it done
Dying breed with a need for speed
85 ATC 70
85 250es Big Red
85 ATC 250R
86 ATC 350x
86 KXT Tecate
87 ATC 250r replica
At The Back Of The Pack
Arm chair racerAt the back of the pack
Zinc plated a few more parts
Omf seat latch
The Gas Tank
So I bought a Clarke white gas tank and it fit ok but I wanted more depth and shine so I decided to paint a stock tank (I know what your thinking ). I bought the Caswell epoxy tank liner kit
.
I first washed the tank out with acetone ,then put drywall screws in the tank and shook .Per the instructions washed out with Dawn dish detergent and then the Acetone again.Mixed the epoxy together and poured in the tank .Rolled and shook tank for about 15 minutes then poured the excess out. Once the epoxy cured it created a hard slick surface inside the tank.
Glass beaded the outside of tank
I bought PPG plastic adhesion kit which includes a primer
Let that primer dry and and sprayed with PPG epoxy primer
Sanded and put second coat of primer on
Sprayed tank using PPG base coat clear coat
It turned out just as I wanted. If it doesn't work I'll put the Clarke tank back on.But for now I am fairly confident it's going to work.
Last edited by fire1; 07-14-2012 at 09:43 PM.
Power User
The day begins with 3WW
Absolutely not a Single doubt in my mind,that tank will look like that 5 years from now. BEAUTIFUL work man!!! I like where this is heading : )
Please help those who cannot help themselves.
ALWAYS buying Museum quality machines,3 and 4 wheels. And any and ALL ,NOS parts,EVERY brand.
I am turning my PM's Off,my Email is billsracing@hotmail.com,put 3WW in the subject. Thanx!
Gun laws do not stop criminals. BULLETS do.
Power User
Roostin Away
I love this thread!
Reply With Quote
