My 85 200X

[RodKnockRacing]

Thought id post some pics of my 200X. I finally got er goin It runs good but doesnt like to idle still gotta figure that out

[jays375]

Been a while coming.Good you got it going!

[shortline10]

Nice ! idle issues are never fun . Does it have a hanging idle were it idles high for a few seconds and then just stalls out ?

[ctk]

what carb are you running? I have a similar setup in my 200x. Im running a xr carb. I got a used carb from ebay and had a problem similar to yours at first. Upon closer inspection the slide was worn and would hang up sometimes and make for a difficult time to get the idle set up right. I found another carb and problem solved.

[3wheelerfan1991]

I was looking at a 85' 200x last week. The trike sold the same day the ad was posted! Haha i snoozed and i loosed. Nice trike!

[the great gazoo]

Where you been hiding, man? We missed you at pennsyltuckey this Jan.
Nice X. I've got that same headlight guard on my SX w/ the 200X front end. You don't see too many of them. Good luck getting it running, they're fun bikes.

[jays375]

Do you deal with Dave Jennings much?Iv'e know him since he started out over on Keiserville Rd out of shed.He always treated me more than fair.When he was in Springville was there a lot.Just had him bore my 350 jug and get me the piston and gaskets.It was cheaper than any online price.I haven't bought much in close to ten years,still treated me well.Don't know if you noticed I live in Nicholson.Some day we need to hook up for a ride.My time can be a little limited,Saturday afternoons are the best.

[RodKnockRacing]

Do you deal with Dave Jennings much?Iv'e know him since he started out over on Keiserville Rd out of shed.He always treated me more than fair.When he was in Springville was there a lot.Just had him bore my 350 jug and get me the piston and gaskets.It was cheaper than any online price.I haven't bought much in close to ten years,still treated me well.Don't know if you noticed I live in Nicholson.Some day we need to hook up for a ride.My time can be a little limited,Saturday afternoons are the best.

I deal with Dave alot he bored my cylinder and built my cylinder head

[RodKnockRacing]

Nice ! idle issues are never fun . Does it have a hanging idle were it idles high for a few seconds and then just stalls out ?

It idles too high and if u turn the idle down it just dies out but if u ride it a little bit with the idle turned down it will idle right for about a min then dies. Ive went threw the carb and the pilot jet is clear. I thought maybe and air leak somewhere but it doesn't race up. other than that tho it runs good ive only had it in third gear and it gets up and goes. theres a small stutter at 1/4 throttle but it clears right up.

[RodKnockRacing]

what carb are you running? I have a similar setup in my 200x. Im running a xr carb. I got a used carb from ebay and had a problem similar to yours at first. Upon closer inspection the slide was worn and would hang up sometimes and make for a difficult time to get the idle set up right. I found another carb and problem solved.

Just a stock 200x carb

[RodKnockRacing]

Could this be the issue a nice ding on the slide

[RodKnockRacing]

Where you been hiding, man? We missed you at pennsyltuckey this Jan.
Nice X. I've got that same headlight guard on my SX w/ the 200X front end. You don't see too many of them. Good luck getting it running, they're fun bikes.

Ive been around yeah it sucks i missed pennsyltuckey

[Qdude79]

I'd bet good money that slide is at least part of your problem, if not all.

[shortline10]

File it !!!!

Could this be the issue a nice ding on the slide

[RodKnockRacing]

File it !!!!

Ill give that a shot Mike