Results 1 to 5 of 5

Thread: Need help bad

  1. #1
    Join Date
    Jan 2010
    Location
    michigan
    --
    12

    Need help bad

    Well here it is. I put a hole through the casing in what I believe is the transmission on a 83 atc 200. Part of the metal was wedged in the gears so i could not get it out. Well i took the bolts out of the housing (behind the shifter for forward and reverse ect) gave it a few taps and it came apart. Bad thing is some gears washers and few other parts came out in a big mess. Now i dont know where stuff goes from there. Also hole the size of silver dollar in bottom of housing. Any help would be appreciated. Thanks. Yeah I know stupid me.

  2. #2
    maxdallasfan's Avatar
    maxdallasfan is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Oct 2010
    Location
    New Jersey
    --
    381
    I know little, but I think your screwed. Search the forum for repair manuals.

  3. #3
    Join Date
    Mar 2010
    Location
    Slidell, LA
    --
    4,738
    Get a manual and a new case.
    Feedback for yaegerb: Click Here

    Need something blasted or polished or both? Send me a PM

  4. #4
    Howdy's Avatar
    Howdy is offline Putting Priorities in Order, Busier than ever. Catch me if you can
    Join Date
    Sep 2002
    Location
    Celina, Ohio
    --
    10,079
    Might be easier and cheaper to just find a used motor / transmission and swap it out.
    Howdy

  5. #5
    Join Date
    Sep 2010
    Location
    Van down by the river
    --
    3,874
    I agree with howdy, less time involved as well. I am sure if you place an ad in the classifieds or look hard enough you can find one near you.
    R.I.P. John Swinehart
    TRIKEFEST 11, 12, 13, 14, 15, 16, 17, 19
    Epic Mikfest 17
    86 200x
    85 250sx
    85 big red
    85 atc 70

    Fabiodriven- cereal goes in first, then milk.
    I’ve got an 8” Grip on a 10” turd... Kyle Kiser

//ArrowChat Integreation Code //