Just curious of what your guyses jetting is with any mods or big bore kit. Looking to know main jet sizez, air screw turns, your elevation and what temp u ride in. Just curious to see what yalls bikes run on
New to the board
Arm chair racerNew to the board
Just curious of what your guyses jetting is with any mods or big bore kit. Looking to know main jet sizez, air screw turns, your elevation and what temp u ride in. Just curious to see what yalls bikes run on
Go Or Blow
Just Too Addicted
Arm chair racerJust too addicted
36mm Keihin
Main 170 summer/175 winter
DGJ needle middle groove winter/one groove higher in the summer
6.0 slide
62 pilot
about 500' elevation
See sig for mods
__________________
'85 ATC250R
.030 Over Wiseco
FMF Pipe/Answer silencer
36PJ Keihin
K&N
Boyesen reeds
Magura hydraulic clutch
Roost Boost
MSR bars
OMF swingarm skid
ITP Beadlocks
Three Wheelin' Since '84
I'm your dingleberry
The day begins with 3WW
ESR 350, TRX9 porting.
Esr atc5 pipe and silencer
Esr reedcage
Keihin 38mm PWK/AS carb
200 main jet
50 pilot jet
DGH needle on middle groove
I live/ride between 300 and 500'the elevation.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
Reply With Quote