What is a good paint to use that I can pick up a Wal-Mart or Home Depot to paint various items like the handlebars, skidplates, etc that will last for a while? I dont have anyone local to powdercoat items. Any suggestions would help....
What is a good paint to use that I can pick up a Wal-Mart or Home Depot to paint various items like the handlebars, skidplates, etc that will last for a while? I dont have anyone local to powdercoat items. Any suggestions would help....
'83 200X
'84 250R
Always looking for more!
when you find out, let me know too.lol. i'm tired of using hard hat rustolium spray paint.
Tim is the name
85 350X(86 motor)
83 200X(stripped down for a total rebuild)
85 200S(project)
I think I may go and see if I can find some of this paint locally..
Here is a link to it.
http://www.rustoleum.com/brand.asp?frm_brand_id=37&SBL=1
Has anyone used this kind???
'83 200X
'84 250R
Always looking for more!
If you have a decent air compressor, I suggest buying a cheap paint sprayer. Sams club or wally world normally has some good deals on entire kits for about $60. You can then go to Napa or a paint shop and have any color in the rainbow made. These guys are also pretty wise as to what type of hardener to add for the intended purpose. You can even clear coat stuff if you practice. It will look a lot better than aever will, and last longer too. BTW, you can charge your buddys to paint some of their stuff and recover the cost of the sprayer.
83 YT 175
85 ALT 125
A spray gun would be best if you can't get the parts powdercoated.I use dupli-color high temp spray paint.You can get it from atou zone,wal-mart, anywhere you can get spray paint.I sandblast and wash the parts before I paint so it sticks good.dupli-color is automotive paint so its good qaulity,not that rustouleum crap.
"I am going out of this world.....the same way I came in...screaming and covered in blood."