New Custom ATC Parts

[jsmay]

hey guy's,
I've been messing around with some ideas and here are a few that i've gone through with.. First is triple trees and forks for ATC 70's. Next is Hub adapters for honda's with 3 on 100 bolts (70) but also 90's/110's too i believe. These add plus 3" per side and bolt to stock hubs but allow you to mount go kart wheels directly to them. I was already asked to make some of these by other members and also I'm gonna make a set for 4 on 110 hubs to go kart wheels.. I will need a few weeks though, sitting on my butt due to a broken collar bone.. 1 plate and 7 screws!

thanks Jason

[Dirtweed]

Ouch. Did you bust up your shoulder racing? Hope you heal up good.

[jsmay]

Yup... Indeed I did.

[oldtime3wheeler]

Like the front suspension! Let me know when they are in production.

[VintageHondaKid]

Whats the cost gonna be on the triples and the wheel adapters. Also what forks are you using

[jsmay]

The triples w/ stem/ bearings and axle are $250
The forks I've used are pw80. I've gotten them off eBay for 20-40 bucks.
Materials are pretty expensive, I use all balls racing bearing which I include along with a grade 8 stem. Not to mention pretty time consuming.


The hubs are $100 for a set.
Thanks Jason