well took my little trike to work today and washed it off. going start gathering some parts up to rebuild it. the one important doing first has a ugly big Clark tank. would a jug off a 200 m be same. i know it will bolt on.
First Time Rider
Arm chair racerNew to the board
well took my little trike to work today and washed it off. going start gathering some parts up to rebuild it. the one important doing first has a ugly big Clark tank. would a jug off a 200 m be same. i know it will bolt on.
First Time Rider
Arm chair racerNew to the board
i plan on fresh bore, xr200 cam, and exhaust. i want to keep it reliable. me and my son play on them all the time. its fun to both of us
Just Too Addicted
Arm chair racerJust too addicted
If you want a race type restro...I have an ims short track tank and super trapp exhaust...
200x race parts needed
Roostin' Away
Arm chair racerRoostin Away
The 200m cylinder isn't the same as the 200x it will work though. The 200m has smaller cooling fins around the front of the cylinder where the stater is. The 200m engines are all gray aswell 200x is all black. If you want to make good power but not loss the honda reliably then I would say run a completed 200xr top end. With a good pipe like jsmays super trapp
would a jug off a 200 m be same
HONDA WITH A WING AND A PRAYER
1984 110 project
1984 125 parts bike
1983 honda 200x
19 85x2honda 200x
1985 honda 250sx
1985 honda 250es
polaris p3 should be a parts bike ***gas tank wanted**
First Time Rider
Arm chair racerNew to the board
only reason i asked about 200m was i already had one off. thanks for the advice. got too see how my money goes. my main goal is to stop the little smoke. lol . but plan to make them run like new and look new. not to sale but th enjoy.
First Time Rider
Arm chair racerNew to the board
what do i look for when i want the wide scoups i see on some of the newer 200x 's
First Time Rider
Arm chair racerNew to the board
the 200es happened to have a 200 x jug, piston and cam. how lucky. i noticed it was black but never payed any attention to it. in business now
Power User
Roostin Away
You must mean the Maier Super Scoops. They still make them for the 200x, and fairly cheap. You could go directly to their website, or try ebay or denniskirk.com or rockymountainatv.com they should all carry them. Good luck, and keep the pics posted up on the build up as you go!
THE 80's RAGE! Currently owns:
81, 85 Yamaha Tri Moto 125
83 Yamaha Tri Moto 200 x2
82,83 Yamaha Tri Moto 175 project
85 Yamaha Tri Z 250
84 Kawasaki Tecate 250
84 Honda ATC 70
85 Honda ATC 350X
84 Honda ATC 250R
(2) 84 Honda ATC 200x
82, 83 Honda ATC 185s
81 ATC 200
Lots of other parts and bikes
New to the board
Arm chair racerNew to the board
Im getting a 200x soon and plan on doing about the same as u but im doing the brake swap and maybe a 350x rear end, im still looking for ideas of how to add newer parts for reliability but are cheap as we'll
A fresh bore, xr cam and exhaust will give this thing exactly what it needs to keep up/ beat alot of the newer machines out there, have u thought about the xr carb and intake to go along with it all
Last edited by d_b3ck; 10-20-2012 at 03:00 AM.
Reply With Quote