New to the board
Arm chair racerNew to the board
Hey,
Im needing to replace the bearings in my 1984 200ES andi wanted to know a few things, how do i remove the colar up against the brake drum on the axle , do i have to take cases apart to knock the bearings out, and what holds the axel in place? Ive never done this before and dont want to mess anything up :-( I have the bearings ordered from ebay
Any advice will help. Thanks so muchhh
Nathan Lovern,Va
New to the board
Arm chair racerNew to the board
The PDF shows a bearing built into the brake cover, is that the one i need to replace? or the one in the axel houseing?
New to the board
Arm chair racerNew to the board
well i now know there is NO bearing left in my break drum, only the race frozen onto the axel next to the brake hub, :-( i managed to move the axel about 1/4 an inch out to the left thats about it. The bearing colar come off and the brake hub came off.
Is the axel free to knock out now???
Roostin' Away
Arm chair racerRoostin Away
Maybe this could help!!? http://www.bikebandit.com/houseofmot...m1891#sch10870
1986 Honda 350X
1985 Yamaha Tri-Z 250
2006 Honda TRX400ex,,,(YA! YA!,,,,,I KNOW IT'S ONE OF THEM 4 WHEEL THINGS!!!!!)
http://www.3wheelerworld.com/showthr...ack+for+sp8twn
Power User
4 Wheels? Huh?
Get the manual from my server, link in my sig area below...
It shows step by step how to do this repair.
---------------------------------------------------------
1984 Honda ATC200ES "Big Red"
1982 ATC200E "Hondie"
1988 TRX300FW "Project Quad" Still in progress....
Reply With Quote