First Time Rider
Arm chair racerNew to the board
finally starting the rebuild. sanded frame back to metal and repainted , rebuilt top end, install new clutch and springs. took all old paint off engine and repainted with high heat paint. have most all new parts to put back on the trike . also installed xr200 cam. whatcha think. my first complete tear down.
Last edited by archman; 01-05-2013 at 10:49 PM.
Just Too Addicted: Protecting Our Community
The day begins with 3WW
Nice job. You'll like that XR200 cam. I put one in my 200S and it woke it up nicely. You won't set any land speed records, but it's a nice improvement.
Originally Posted by fabiodriven
Liberalism suspends the intellect of its victims, while at the same time tricking them into believing that they're smarter than everyone else.
If we've done business together, please leave me feedback. Thank You!:
http://www.3wheelerworld.com/showthr...t=Scootertrash
Got The Holeshot
Arm chair racerJust too addicted
Looks good, I got the same deal going on with mine. Taking advantage of the cold months
yaegerb
The day begins with 3WW
Nice work!
First Time Rider
Arm chair racerNew to the board
i have been working on it. soon as i get done i have a 85 and 2 86 x to do
Power User
The day begins with 3WW
woooh there hoss. You dodn't properly prep that piston before install. why not?
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
First Time Rider
Arm chair racerNew to the board
got little more progress done
Last edited by archman; 01-07-2013 at 02:45 PM.
First Time Rider
Arm chair racerNew to the board
and more pics
At The Back Of The Pack
Arm chair racerAt the back of the pack
What's he missed? just wondering...
First Time Rider
Arm chair racerNew to the board
more progress
First Time Rider
Arm chair racerNew to the board
getting close. some reason can only put one pic at time.
Power User
The day begins with 3WW
preping the piston means using sand paper to take off the "sharp" edges of the piston and valve releifes as well as lightly sanding the shinny flat so fluid does not puddle on the shinny spots. during combustion.
it's pretty common from good builders to prep all pistons. if you do not, you chance gettign hot spots on the sharp edges and that can cause detonation as well as it may never run "quite rught" because of uneven heat spots and shinny fluid piddling spots during combustion. i prep all pistons i install.
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
Reply With Quote
