Results 1 to 5 of 5

Thread: 85 200x oil change

  1. #1
    Join Date
    Dec 2012
    Location
    bowlingreen ky
    --
    24

    85 200x oil change

    I'm new to the 3 wheeler world I've read that I can run 10w 40 I seen where they talk about cleaning the oil screens. Could somebody tell me where these screens are?

  2. #2
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,802
    The screen is located at the 24mm drain plug so when you do the oil change its right their. 10w-40w is fine.
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  3. #3
    Join Date
    Jan 2013
    Location
    Golden B.C.
    --
    28
    and wotz with 24mm ?
    how many people find they dont have one of those in thier shop?
    its almost as difficult as my ducati to get in and out.

  4. #4
    Join Date
    Jul 2009
    Location
    South Florida
    --
    6,802
    You can remove the skid plate and use an adjustable wrench or buy the socket , no bigie ....


    Quote Originally Posted by shadam View Post
    and wotz with 24mm ?
    how many people find they dont have one of those in thier shop?
    its almost as difficult as my ducati to get in and out.
    78 atc 90/180cc Dickson Full Suspension
    76 ATC90/180cc Nicholson
    77 atc 90 Dickson Full Suspension
    84 KLT 110/123cc Powroll Racer from 80s
    87 atc 125m stock
    84 atc 200x Curtis Sparks
    84 atc 200x Powroll My race bike from 80's
    83 atc70/108cc Powroll blue Xmas Special
    81 atc185s HP-ATC full suspension

    Performance Shop is Open PM me for Service

    My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10

  5. #5
    averysdad is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2013
    Location
    Cleveland, tx
    --
    218
    I used a 15/16 socket must be close to a 24mm it worked lol. look out for the spring.

//ArrowChat Integreation Code //