200x wheels, what do I have????? UPDATED !!!!

[110klt]

OK I talked to a guy that said he had a rear pair of wheels for a 1st gen 200x. He gave me the wheels and they are aluminum. However, they don't have the same offset. The pair that came with the bike are about 5 3/8 from the bolts to the edge of the rim. The set I was given are about 4 1/4.


This is the wheel that came on my bike


This is what I just picked up

Any help in what I have?

[dcreel]

Those look like 4/156 Tecate wheels

Are they 10" wheels?

[trizilla]

first pic is aftermarket wheel, second is stock 1st gen 200x.

[jdm97ek4]

The one that came with your trike are.itp or douglas the other ones are fourrax did older.honda.ones my 200x has z400 rear wheels d.i.d. And I have set of 10in douglas wth paddles and I h zs ve set of 40 ex rims for.it as.well

[110klt]

The one that came with your trike are.itp or douglas the other ones are fourrax did older.honda.ones my 200x has z400 rear wheels d.i.d. And I have set of 10in douglas wth paddles and I h zs ve set of 40 ex rims for.it as.well

OK guess I missed the stamp on the back, they ae stamped I.T.P. Would anyone have a bolt pattern size or what might be good stock to swap over too. My I.T.P's have about a 1" wider offset than stock and I would like too keep that ir close if I could.

Oh and that is a nice looking 200x in your signature as well.

[110klt]

Those look like 4/156 Tecate wheels

Are they 10" wheels?

They are 8's

[110klt]

OK after much interwebing last night I see that my wheels are 4/110 and the offset I am running on my ITP's are a 3+5 which seems to be rather common. I found a set of 9x8's that have a 3+5 offset for a reasonable price and I think the larger wheel would be a better look for my bike. I did happen to see some 10x8's too, if given the choice would you go to a 10? Or would they look out of place?

[TatTooL23]

i think the 10's look great but depending on the thickness and how u ride u could bend a 10 easier.

[jdm97ek4]

I run 2.5 wheelspacers on my 200x and my 350x will have the same 49in wide axle is very stable and fu sliding thru the corners

[RoscoW]

If you moving up to a 9" rim, consider a Polaris Outlaw IRS rear rim. 4-110 pattern but the offset is really drastic to allow for the CV joints to push as far out as possible and keep driveline angles OK on the IRS. Turn them around and it will be the same as your ITP's and wheel spacers.

http://www.rockymountainatvmc.com/p/...l-Center-Wheel

Here's a set on my R..






Ross..

[110klt]

If you moving up to a 9" rim, consider a Polaris Outlaw IRS rear rim. 4-110 pattern but the offset is really drastic to allow for the CV joints to push as far out as possible and keep driveline angles OK on the IRS. Turn them around and it will be the same as your ITP's and wheel spacers.

http://www.rockymountainatvmc.com/p/...l-Center-Wheel



Here's a set on my R..






Ross..

Those are really deep. Gives me another option to think on. Thanks

[110klt]

I hope this will look pretty good on my 200x....... I ordered a set of 9x9 ITP's with a 3+6 offset and a set of 400ex hubs to go with them. I am not looking for monster wide, but I hope it makes the bike more stable.

Anyone want to talk favorate rear rubber for a 200x??????