250sx front and rear rack with all mounting hardware..... whats it worth??

[rouseanator]

Ok so I traded a blaster parts bike(pretty much complete cracked case,but had new/used ones) for these today I think I got the better deal how about you all. what these worth seem to be real rare.

[rouseanator]

the racks are perfectly straight not even a ding in them and some rust but not bad

[barnett468]

hello

i assume you are planning on selling them. I would put them on ebay with a hidden reserve of $300 and let people make offers. You can lower the reserve anytime. They are worth what ever one will pay. i would take a wild guess at $200 to the RIGHT person if they are hard to come by.

[tri again]

the racks are perfectly straight not even a ding in them and some rust but not bad

My only three wheeler regret was selling an sx with factory racks which they guy didn't even want.
I'd actually love to have those and should have $$ (paypal etc) by the end of the week unless you have other plans for them.

Thanks

[rouseanator]

I dont know if I would sell them cause I want to put them on my sx but if someone makes me an offer I cant refuse they might get them

[tri again]

I'd hang onto them>
Not sure why, but they are not real common in the last year or so.

Funny how people like to take stuff off bikes etc, like headlights and racks, maybe think it makes 'em go faster.

It gets dark alot in the pacific nw, so headlights are important to me and racks act like roll bars and help save plastics.

The only funky thing about those racks is that you need to drill holes in the fenders for the supports and big shiny knobs.

I posted some pix of my factory racks or can post again.
Search key should come up as 'sx rack'.

I think I've seen 'em listed for around 200$ which is, or used to be almost enough to get another trike.
I may try to make one out of a 200es rack I have laying around.
Seems like we're always hauling or dragging something around here.
I dropped one sx down onto some flatter profile tires so it's not so tippy and makes a great utility rig...and 2 sx's fit in the truck for trips to the dunes.
One 250es and there's no room in the truck for anything else.
Funny too, because side by side they don't look all that different.

Anyway, back to the racks...
Great for grabbing and hauling chainsaws and for people to sit on (backwards) for those long walks across the field through the puddles.
Make sure your trunk lid opens before you finalize the fit.
It's close and real tight but the trunk lid will open and close.

Do you ever get down Oregon way?
We host a 3 day festival every summer and trikers get in for free.

[rouseanator]

Cant wait to put these racks on my sx its out getting the swing arm bearings done I attempted it when I popped of the cover it was filled with rusty dust so I soaked it in pb blaster all night and in the morning still super stuck so I took it to a friend that used to work at a motorcycle shop said he would do it for 75 bucks talked to him today and he said these are the worst he has ever seen might have to cut the bolt lucky he has a few parts sx's

[tri again]

Cant wait to put these racks on my sx its out getting the swing arm bearings done I attempted it when I popped of the cover it was filled with rusty dust so I soaked it in pb blaster all night and in the morning still super stuck so I took it to a friend that used to work at a motorcycle shop said he would do it for 75 bucks talked to him today and he said these are the worst he has ever seen might have to cut the bolt lucky he has a few parts sx's

oooh yeah, been there.
Made me oil ALL the bolts on all the trikes for that future eventuality.

Good luck and keep us posted.