Page 2 of 2 FirstFirst 1 2
Results 16 to 22 of 22

Thread: Acquired old Tri moto 125

  1. 12-17-2003, 12:33 AM #16
    350XXX
    350XXX is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Nov 2003
    Location
    Indiana
    --
    192
    one more tip, the bolts in the motor are VERY soft. i had to use a 3/8 drive pnuematic impact with a 1/4" socket and a 1/4" phillips hex bit to break most of them free.
    Tim is the name
    85 350X(86 motor)
    83 200X(stripped down for a total rebuild)
    85 200S(project)
    Reply With Quote Reply With Quote
  2. 12-17-2003, 05:19 PM #17
    nuttybazerko
    nuttybazerko is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Dec 2002
    --
    107

    year

    i'd say that is an 81 or newer unless someone changed the headlight. mine was a 1980 and the headlight had less plastic around it and it was more rectangular so to speak. those machines do awesome wheelies! mine never had any problems with the oil injection and it seems i hear of a lot of oil pumps going bads on blasters. what did yamaha start doing wrong?
    that's my boy! a definite future trike rider!
    84 TECATE PARTING OUT
    84 ATC250R
    89 WARRIOR PARTING OUT.
    04 EATON VIPER JR. 40 (LITTLE NUTTYBAZERKO'S MACHINE)
    Reply With Quote Reply With Quote
  3. 01-31-2005, 06:35 PM #18
    wheelercrazy
    wheelercrazy is offline Registered User New to the board
    Join Date
    Jan 2005
    Location
    OKLAHOMA
    --
    3
    hello can you please send me picture of the carb hook up to the motor.
    i have yt125 with alot holes hanging from the motor thank you my email lemitchell@cableone.net
    Reply With Quote Reply With Quote
  4. 02-01-2005, 12:23 AM #19
    rustbucket
    rustbucket is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Oct 2004
    Location
    pentwater michigan
    --
    180
    your rings are whooped it gets hot then loses compression and dies. looks like a 81-83 since it has a shroud around the headlight as the 80 model did not. looks like its in good shape. these trikes were pretty tuff although mine didn't last long I lost the air filter while mudd bugging the rings and gaskets and reeds are available,however the reeds are a diffrent design they are now two petals. They cost about 75 american
    1980 trimoto 125 mods include a ripped seat broke fender and bent handle bars
    1981 trimoto 125
    1971 suzuki ts 185 it will spank a 200x
    1966 gmc 3/4 ton
    Reply With Quote Reply With Quote
  5. 02-01-2005, 12:07 PM #20
    Dan Tenn's Avatar
    Dan Tenn
    Dan Tenn is offline Just Too Addicted Arm chair racerJust too addicted
    Join Date
    Oct 2002
    Location
    SE Minnesota
    --
    533

    reeds

    You can order replacement boyeson power reeds for this model at Dennis kirk for $28.

    http://www.denniskirk.com/jsp/produc...ain&mmyId=6226
    83 YT 175
    85 ALT 125
    Reply With Quote Reply With Quote
  6. 02-01-2005, 10:27 PM #21
    rustbucket
    rustbucket is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Oct 2004
    Location
    pentwater michigan
    --
    180
    now that i read my previous post i see my mistake the whole top end job set me back 75 bucks
    1980 trimoto 125 mods include a ripped seat broke fender and bent handle bars
    1981 trimoto 125
    1971 suzuki ts 185 it will spank a 200x
    1966 gmc 3/4 ton
    Reply With Quote Reply With Quote
  7. 02-02-2005, 08:22 PM #22
    edog's Avatar
    edog
    edog is offline I'm like an Original Gangsta...but a post whore instead. The day begins with 3WW
    Join Date
    Mar 2004
    Location
    New Hampshire
    --
    6,629
    Nice Tri Moto,looks to be in good shape.
    Reply With Quote Reply With Quote
//ArrowChat Integreation Code //