A little help with spark plugs

**TRI-Zbrian** · 12-18-2003, 08:59 PM

yeah your bike is running to rich and fouling the plugs on you you have to lean it out a bit and it should take care of your prob try running a D7EA NGK plug in it it is a tad bit hotter burning plug and might help you a bit with how rich its running but the proper fix would be to rejet the carb on it.

**smokinp** · 12-18-2003, 09:03 PM

I think that i am goin to buy the right carb for it...what groove was urs sit at?

**TRI-Zbrian** · 12-18-2003, 09:11 PM

i can not remember sorry i owned that bike like 4 years ago its lng gone

**smokinp** · 12-18-2003, 09:13 PM

Thats alright,u'v been a good help to me already.i dont understand what would make it shut off tho?

**TRI-Zbrian** · 12-18-2003, 09:17 PM

its because the plug is fouling out and can no longer creat a hot enouph spark to ignite the feul/air mixture so it cuts out and then finaly dies.

**jeffwilson0** · 12-19-2003, 11:23 AM

I have the same bike, factory, the needle should be right in the middle groove, 3 from the top, or 3 from the bottom, however you look at it. I have the mixture screw turned out 2 full turns and it seems to be the best it has ever been.

**smokinp** · 12-19-2003, 11:49 AM

by saying my carb may need rejettin,does that mean moving the slide up or down on the groves?

**TRI-Zbrian** · 12-19-2003, 12:07 PM

yes it needs to be adjusted not changed

**smokinp** · 12-19-2003, 03:53 PM

C:\My Documents\2003-01 (Jan)\IM000844.JPG
C:\My Documents\2003-01 (Jan)\IM000847.JPG

This is what my plug looks like...[/img]

**TRI-Zbrian** · 12-19-2003, 04:08 PM

the pics didnt work they are not clickable

**smokinp** · 12-19-2003, 04:14 PM

It says that my pictures are too big,does anyone know how to make them smaller?

Thread: A little help with spark plugs

Thread Tools