At The Back Of The Pack
Arm chair racerAt the back of the pack
I'm in the middle of ordering parts to convert my 185s to 200cc. And I need to know if I need to order a head gasket to fit a regular 200 or if I go oversized with piston do I need to get an over sized head gasket cause I can't find any oversize head gaskets. Like say if I go from stock 65.mm to 65.5mm will the stock 65mm head gasket work?
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
Power User
Got the holeshot
Yes the stock headgasket will work. My R is bored over and stock head gasket works. Should be the same for the 200's
1985 Honda 250r x2
1986 Honda 250r
1986 Honda 250sx
1985 Honda 250sx x2
1985 Honda 350x x2
1986 Honda 350x
1984 Honda 125m x4
1983 Honda atc 70 w/ Lifan 125
1984 Honda atc 70
Yamaha tri zinger
Yamaha 4 zinger
Brap braaaap
http://www.youtube.com/user/3wheelsoffroad
At The Back Of The Pack
Arm chair racerAt the back of the pack
Thanks Jason
1. 83 185s: (the money pit) xr200 cam, 200cc cylinder, 10.25:1 piston, 83 250r front end, 450r hubs, full suspension
2. 85 Big Red 250es: in pieces
3. 85 200m
4. 00 Polaris Magnum 325 2x4: stays broke
5. 02 Yamaha Wolverine 350 4x4: trail bike
Reply With Quote
