At The Back Of The Pack
Arm chair racerFirst time rider
I'm looking to get some nice new bars and levers for the z & I'm looking for suggestions.
I'm after a set of black bars. I know a lot of people talk about pro tapers but what bend? I'm after a similar feel to stock.
Regarding the clutch and brake I'm after a full new setup not just levers. So I want to know what you guys think? I'd like an all black set up if possible & I'd like them to look modern in design
Just Too Addicted
Arm chair racerJust too addicted
Pro tapers and ASV set up for the levers. They make a cool clutch perch, not sure if they make a master but you can pick up just about any common master off a new quad and get an ASV lever for it. No idea on the pro taper bend for the Tri-Z tho. I just bought a set of Pro- tapers for my Tecate that are a medium rise ATV bar but have enough width to span the wide triples on the tecate. haven't arrived yet or i'd post pics.
2) 1977 Honda ATC90
2)1985 Tecate
2005 Banshee LE
01 Honda 300EX
74 Suzuki TC100
66 Honda 305 Scrambler
At The Back Of The Pack
Arm chair racerAt the back of the pack
these are a yz bend, there is so many damn bends it can be a headache. the msr clutch perch and lever was like 20 bux and it looks great. The master I used was off of a 07 yz450 or something which was also 20 bux on ebay. One day I will get ASV's. I have the original pro tapers (1-1/8) on one of my bikes, but for the alum bars I just like renthals, no reason really, just what I've always used...
also I used a cheap motion pro twister which looks and works great although it's not a perfect fit with that master cylinder ( kinda sits above it a little crooked)
At The Back Of The Pack
Arm chair racerAt the back of the pack
im looking for a set of bars that is as close to the stock tri-z bend as possible too
85 tri-z (in pieces)
421 cub banshee
Power User
Roostin Away
i run the pro taper seven eights Atv high bend works for me.
I also have about 5 different bars for my tri-z, my favorite being my old skool answer racing bars.
2- 85 Tri-Z's black and Yellow
2- 85 250SX's
1- 85 200X
3-ATC 70's
2- 85 tri-zinger's who needs some parts
At The Back Of The Pack
Arm chair racerAt the back of the pack
Which is closest to stock?Originally Posted by tri-Z ripper
85 tri-z (in pieces)
421 cub banshee
At The Back Of The Pack
Arm chair racerFirst time rider
Pro taper Windham/RM mid's I went with for the bars, should have them on this weekend and will report back. No levers yet I was pricing up a asv clutch perch/lever and brake lever costing around £100 but I don't have that sort of cash at the mo
First Time Rider
Arm chair racerNew to the board
i have a set of asv's from a yfz 450(love the look and feel) on some old saggy bars but thinking about picking up a set of renthal high cr bars
my brother has a set on his 250R and they feel nice
Reply With Quote
