250r - sitting for 10 yrs (small video of it running!!)

**Dirtcrasher** · 09-08-2013, 09:42 PM

The one I got had sat over a decade. I doubt you will find any wear from sitting. Crank seals are a good investment and per the shop manual I believe the LH side gets sunk 5MM into the bore to pass the crank taper........................

**C.J** · 09-08-2013, 10:07 PM

Originally Posted by Dirtcrasher

The one I got had sat over a decade. I doubt you will find any wear from sitting. Crank seals are a good investment and per the shop manual I believe the LH side gets sunk 5MM into the bore to pass the crank taper........................

Yea I know there won't be any bearing wear from sitting... But gotta think why it got put away in the first place. My LT250R sat for 13 years because of a wore out top end and bad rear end bearings. Checking things like that are just a precaution that's nice to do. It may seem 'over kill' or something like that,, but ya never know ya know?

**NO-SCALES** · 09-09-2013, 12:24 AM

Click image for larger version.

Name: CAM00503.jpg
Views: 40
Size: 1.63 MB
ID: 176896

Click image for larger version.

Name: CAM00504.jpg
Views: 32
Size: 1.48 MB
ID: 176897

dirty!!!!

**aldochina** · 09-09-2013, 06:06 AM

better than mice!!
Boy she cleaned up nice!!
Man you got a killer price!!

**6speedthumper** · 09-09-2013, 08:27 AM

Dirty, but, not the worst! Lol. That filter may even clean up nicely, if you have a K&N service kit.

**Fungo Wizard** · 09-09-2013, 01:04 PM

LMAO!!!! AHHH the good ole days!

**NO-SCALES** · 09-10-2013, 10:18 AM

Click image for larger version.

Name: CAM00505.jpg
Views: 15
Size: 1.02 MB
ID: 177009

Click image for larger version.

Name: CAM00506.jpg
Views: 17
Size: 1.01 MB
ID: 177010

Click image for larger version.

Name: CAM00507.jpg
Views: 9
Size: 810.5 KB
ID: 177011

I FOUND THESE TWO TIRES A LOCAL TIRE SHOP.

both goodyear. small one is a 23x8x11 and big one is 24x8x11. quite a bit of difference in size, to me. anyone run one this big on an r?? I went a head and got the 23 cause it was brand new , or like brand new, I don't think its been mounted , but has a date of '03 on it. $30 , I couldn't turn it down. I wonder if that 24 would rub ,though??

**NO-SCALES** · 09-11-2013, 10:28 AM

here is a short clip of it running, still pretty rough , but hey it runs!!! lots of work ahead. are these things supposed to be this loud?

**tommerp** · 09-11-2013, 10:31 AM

LOL .. ok .. tell me again how to kill a Honda?

****Sitting for 10 years..
****Still runs better then some that were "running last week"

What a find, man... that's all I can say.

**C.J** · 09-11-2013, 11:27 AM

I've got some stock fronts I need to get rid of. I'll get some pictures it you want? I believe they are 22-8x11? Not sure. I'll look when I get home

**NO-SCALES** · 09-11-2013, 11:35 AM

Ill look at them , shoot me a few pics and prices

**C.J** · 09-11-2013, 11:49 AM

Will get pics for you later when I get home. I got them with this 88 LT that I bought. They don't fit my zuki rims so I got no use for them

**C.J** · 09-11-2013, 10:48 PM

Ok so turns out they are Ohtsu H-Trac R/T 101 in 21 x 7.00 - 10 only just got home and it's already dark so I brought one inside for pictures. The other is just the same condition/wear

If you want them make me an offer, if not I'll throw them in the for sale section. No clue what shipping would be on them

**NO-SCALES** · 09-11-2013, 11:00 PM

Thanks for the offer but i dont have a rim that woukd work

**NO-SCALES** · 09-11-2013, 11:06 PM

Thanks for the offer but i dont have a rim that woukd work

Dang phone

Thread: 250r - sitting for 10 yrs (small video of it running!!)

Thread Tools