New to the board
Arm chair racerNew to the board
I am in the middle of dismantling the rear axle to access the rear axle bearings on my 83 Honda 200 and I found the rear brake drum is in pretty poor shape where the seals will ride. I don't want to put that torn up one back in there , does anyone out there have one that they can let go of.. Also the brake drum cover has a seal on it as well that's completely shot as well... HELP HELP HELP!!!!
Trying to bring this old girl back to life after sitting for 20 years
Mark
Power User
Teaching quads a lesson
You may be able to use a "Redi-Sleeve" to save your drum. http://www.timken.com/EN-US/products...disleeves.aspx . I've seen them used with good results and they're relatively cheap.
Trikes
1970/71 US 90 (Aquarius Blue)
1970/71 US 90 (Future Project)
1972/73 US 90 Camo Project (110 Big Bore)
1972/73 US 90 Green
1982 ATC 70
1983 ATC 70 (Ladybug)
1973 ATC 70
1965 Marketeer 3 Wheel Golf Cart with 1986 Honda 250 drivetrain
TF 2015
Other
1983 Honda Z50
Feedback http://www.3wheelerworld.com/showthr...ck-for-coopool
http://www.3wheelerworld.com/showthr...k-for-coolpool
Reply With Quote