At The Back Of The Pack
Arm chair racerAt the back of the pack
Sorry to jack the thread again, Is this for sure? as Ive been looking to upgrade the carb on my 200x for a while now, but when I took it off to clean a week or two ago I measured the intake and its 26mm... and also the intake is (a good) 26mm so I just kinda figured that that was stock?Originally Posted by christph
Power User
The day begins with 3WW
Stock 200x carb is 24mm , you might have a xr200 carb which is 26mm
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
At The Back Of The Pack
Arm chair racerAt the back of the pack
yeah I just checked the manual (says 24) I just assumed it was stock as it has PD62A on the side which is '83' according to the book. Glad I didnt buy an XR200 one now! seems to have the matching intake boot/manifold too. Thanks for the reply...
Reply With Quote