Help finding discontinued Yamaha oil seal

[Yamada]

I'm rebuilding my 1984 Yamaha YTM-225DX and I need the output shaft oil seal. This is a special oil seal and it is discontinued.

It is part 16 in the picture
16: OIL SEAL,S-TYPE. The yamaha part number is 93101-26117-00
It is special because it goes between the aluminum housing and the bearing. And there is a big nut that tighten the bearing and the seal together.

[just ben]

if you have the old seal and the numbers on it are readable you should have no problem getting one from an industrial or bearing supplier.

[dave ytz250s]

looking for this?
http://www.ebay.com/itm/NOS-Yamaha-1...ae842c&vxp=mtr

[Yamada]

if you have the old seal and the numbers on it are readable you should have no problem getting one from an industrial or bearing supplier.

I have the old seal but it was damaged and the number are hard to read. My bearing shop didn't stock this kind of oil seal.

looking for this?
http://www.ebay.com/itm/NOS-Yamaha-1...ae842c&vxp=mtr

Thank you dave ytz250s, I already looked fot it on ebay and I didn't find one. You are better than me with ebay.

[dave ytz250s]

your're using .ca or .com
if the seller from US doesn't put a shipping price for canada it won't show up on ebay.ca
most of them do ship to canada you just have to ask

[Yamada]

your're using .ca or .com
if the seller from US doesn't put a shipping price for canada it won't show up on ebay.ca
most of them do ship to canada you just have to ask

I know why my previous research on ebay didn't work. I was looking for 93101-26117-00 and it showed a lot of seal but not the right one. When looking for 93101-26117 the right seal showed up.

[Yamada]

Thanks to dave ytz250s I now have the right part.
The number on the seal is ARS A20 S3 26.5 40 5.2 HS.

Next time I go to my bearing shop I will ask them is they can find this part. But I know Yamaha can have special bearing and seal impossible to find. I know you can't get rear wheel bearing for the Raptor 700R at the bearing shop. They have the same number has the regular bearing but the dimension are not the same.