Lookin to add a resi to my bike. Previous owner didn't have one. My problem is the top mounting bracket for the resi isn't there. Was wondering if anyone has had this issue and how to solve it ?
New to the board
Arm chair racerNew to the board
Lookin to add a resi to my bike. Previous owner didn't have one. My problem is the top mounting bracket for the resi isn't there. Was wondering if anyone has had this issue and how to solve it ?
First Time Rider
Arm chair racerNew to the board
You can make one out of aluminum or make a hanger bracket for it. I've seen a hanger bracket made from 1/8 bar stock. A small circle was made first for the mounting bolt to go through but a larger washer is needed for it, then he made a carrier cage for it.
I'm your dingleberry
The day begins with 3WW
Due to my using a z400 rear master cylinder on an R I built last winter, I was unable to mount the coolant ressy. I just routed the line to hang near the swingarm pivot so overflowing coolant would have a place to go. So far I have not lost coolant or had any other issues.
Just an option I thought I would throw your way.
Last edited by RIDE-RED 250r; 11-12-2013 at 05:03 PM.
Trikes:
'85 ATC 350R
'85 ATC 250R
'86 ATC 350X
'85 ATC 350X
'84 ATC 200ES Big Red
'84 ATC 125M
'85 ATC 110
'85 ATC 70/110
If you have bought from me or sold to me, please leave me feedback here>>> http://www.3wheelerworld.com/showthr...+RIDE-RED+250r
New to the board
Arm chair racerNew to the board
I haven't had a chance to fire it up since I drained all the old coolant out and put new but im hoping I don't lose any.
First Time Rider
Arm chair racerNew to the board
How did the bike stay?
New to the board
Arm chair racerNew to the board
Still dripping a littleOriginally Posted by hitmeup760
First Time Rider
Arm chair racerNew to the board
From where? The coolant tank or the hose connecting to the tank?
New to the board
Arm chair racerNew to the board
I don't have a coolant tank. It's dripping out of the overflow line straight from the radiator
Reply With Quote