Formerly "ATCaddict"
Lord of the trike
!!!!! Check it out! This little Santa brought me a new o ring chain, 500r bottom end seal kit, crank bearings, proX connecting rod, swinger bearing kit, 89.5mm vertex piston, and a gasket kit along with cometic top end rebuild kit! Looks like Santa wants my 500R back up and running soon
Santa bringing any of you trikers some new stuff soon?!
TrikeFest 07,08,09,10,11,12,13,14 SandPuppie's Ride 07,08,09 Imperial Invasion 09, 13
Roostin' Away
Arm chair racerRoostin Away
Sweet!!! maybe Santa wants you to have it running by xmas so he can ditch his reindeers and pull his sled,,,!!
1986 Honda 350X
1985 Yamaha Tri-Z 250
2006 Honda TRX400ex,,,(YA! YA!,,,,,I KNOW IT'S ONE OF THEM 4 WHEEL THINGS!!!!!)
http://www.3wheelerworld.com/showthr...ack+for+sp8twn
Power User
The day begins with 3WW
Congrats on the parts...But,,,,that has got to be the ugliest/ goofiest Santa I have ever seen !! lol
Please help those who cannot help themselves.
ALWAYS buying Museum quality machines,3 and 4 wheels. And any and ALL ,NOS parts,EVERY brand.
I am turning my PM's Off,my Email is billsracing@hotmail.com,put 3WW in the subject. Thanx!
Gun laws do not stop criminals. BULLETS do.
Formerly "ATCaddict"
Lord of the trike
Lmao I was going to call the thread 'look what this little Down syndrome Santa brought me' but thought it may be too offensive for this forum
TrikeFest 07,08,09,10,11,12,13,14 SandPuppie's Ride 07,08,09 Imperial Invasion 09, 13
At The Back Of The Pack
Arm chair racerAt the back of the pack
down syndrome Santa or not that little guy came threw in the clutch!
hey what company makes the seal kit? i have been searching hi and low for a complete bottom end seal for kit my 300 build
and have only found kits like that for the 85 / 86 R's i am just going to call whatever company made your 500R kit and see if
they can help Santa bring me a kit lol.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Right on! I should have talk to Santa before you. I asked for a new gas tank and tires for my 350x and was told to settle down. SANTA IS ON A BUDGET THIS YEAR!
Formerly "ATCaddict"
Lord of the trike
http://www.ebay.com/itm/ATHENA-COMPL...76460b&vxp=mtr seal kit from Athena who my 500 kit is from, or http://www.partzilla.com/parts/detai...P-4061886.html vesrah i think is probably fine too and cheaper. You should be able to use every thing in both of those kits aside form the head gasket lol base gasket is probably different too but I think you might be able to trim the 250 base gasket and run it with the 300 kit.
my only suggestion for seals would be to jump on partzilla.com and go down the list to buy all the individual seals you need. I dont know if there are kits for them, but my 500 kit came from my brother that goes through Magnum powersports.
TrikeFest 07,08,09,10,11,12,13,14 SandPuppie's Ride 07,08,09 Imperial Invasion 09, 13
At The Back Of The Pack
Arm chair racerAt the back of the pack
thanks for the tip,
i actually just got off the phone with Larry over at racers toy store. tried to see if he had any kits available....needless to say he didnt. tho he did say he was going to try and make a kit for me this afternoon. said he would call me by the end of the day on whether he could piece one together for me. hopefully Santa can come threw with this seal kit
i already have my hands a complete athena gasket kit plus a NOS honda center case gasket if need be. so i am in good shape with the gaskets, just need to piece together a darn seal kit....
Formerly "ATCaddict"
Lord of the trike
i just checked partzilla.com and theres only like 5 or 6 seals on there you need. you could get all those for less than 50 shipped. do you need bearings too?
TrikeFest 07,08,09,10,11,12,13,14 SandPuppie's Ride 07,08,09 Imperial Invasion 09, 13
Just Too Addicted
Arm chair racerJust too addicted
Nice haul from Santa!! The anti-Santa hurt my feelings yesterday and told me the shaft for my q-race shock needs replaced so the good Santa has to go on a budget LOL
but he IS brining me tri-z sprockets and showed up with my suzuki quadracer hq shirt today so I'm stoked! Lol
too many bikes to count. too little time on hand.
Formerly "ATCaddict"
Lord of the trike
At The Back Of The Pack
Arm chair racerAt the back of the pack
I hope George Was not the BAD santa! lol. i was totally amazed that he didnt have to tell me some bad news about my shock
back when he was taking care of it. everything actually went without a hitch as a matter of fact. Budget or not Sants usually does come threw in the clutch.
Jason, on partzilla one of the key seals in listed as obsolete, so thats never a good thing. i needa piece a full set together from somewhere.....i wanna have the engine up to the shop by next weekend. As to the bearings i do not need crank bearings i am going with CR500 crank bearings. tho i dont no what kind of shape the rest of the bearings are in but i am sure once
Ken pulls them apart i will here about it if they are bad.
Just Too Addicted
Arm chair racerJust too addicted
Yea it was Mr. George lol I was just joking. He's really freakin cool. I had a sneaking worry it was gunna be bad but it still bummed me to know it was. I know he is just doing his job but he's still the anti-Santa!! LOL I already got my plan of action figured out so it's alllll goodOriginally Posted by JasonB
too many bikes to count. too little time on hand.
Reply With Quote
