Must be LH threads.......
Morons.
Power User
Catch me if you can
Must be LH threads.......
Morons.
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
Roostin Away
i kinda ran into the same thing a few months ago.guy stripped out the threads then drilled a hole in the shaft,used a washer and nail to hold the clutch on.
Signature pic removed,becuase of no helmet.
Got The Holeshot
Arm chair racerJust too addicted
Yes LH thread....tried on the wrong side,striped the thread in the nut and don't have any to replace....so they weld it.....
1986 ATC500X
1985 ATC250SX
1985 ATC200X
1985 ATC250R
1986 ATC250R
1984 ATC250R
1981 ATC70
1984 ATC70
1985 ATC70
Custom built ATC70 / 250R laydwon swap
1986 ATC250SX FATCAT
Power User
Teaching quads a lesson
Ya, that was my assumption as well.
At The Back Of The Pack
Arm chair racerAt the back of the pack
Nice piece !
Power User
Catch me if you can
Heck, your guy could have used the cone washer and a rollpinOriginally Posted by leevarnado
All our government does is distract us while they steal from us, misspend our tax $ and ruin our country
Power User
The day begins with 3WW
I feel for ya Jim . I run into the back wood repairs all the time , my latest head shaker was the normal broken off foot peg bolt with a twist . They drilled a hole and jammed a large concrete cut nail in the hole
78 atc 90/180cc Dickson Full Suspension
76 ATC90/180cc Nicholson
77 atc 90 Dickson Full Suspension
84 KLT 110/123cc Powroll Racer from 80s
87 atc 125m stock
84 atc 200x Curtis Sparks
84 atc 200x Powroll My race bike from 80's
83 atc70/108cc Powroll blue Xmas Special
81 atc185s HP-ATC full suspension
Performance Shop is Open PM me for Service
My Feedback http://www.3wheelerworld.com/showthr...ck+shortline10
Power User
The day begins with 3WW
someone I think most of us vets have seen thing kind of stuff before quite a bit. it sucks and costs you 5Xs what you paid for the item originally but in the end some of it is useable. my initial thoughts are to remove everything around the area all those usable parts then go in with a grinder or cutter and cut it. the crank is trash and so is that housing, so that needs replacing, but if done right you may be able to salvage everything else including the case half.
if you already got it, then sorry for adding.
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
First Time Rider
Arm chair racerNew to the board
It is truly amazing what some people will do. I've seen plenty myself. Some of these things are very easily fixed "correctly" with just a slight amount of ambition. I swear, some people put things together with "stupidity" when the right "hardware" is right next to their left knee! After it's done, they look at the right "hardware" and say "what are these for?" and throw that remaining "hardware" away. I'd like to say I'm at a loss for words in those situations, but the truth is, I have a lot of words that I can't put here....you know what I mean....
1986 ATC250R
1986 ATC200X
1985 ATC200X
Just Too Addicted
Arm chair racerJust too addicted
I wonder if the person who did that actually thought they were creative and thrifty ?
Damn.
Last edited by sweetip2000; 12-28-2013 at 08:07 PM.
♠ 58 ♠▓
▓ ▓Ride 3
Reply With Quote