Page 2 of 2 FirstFirst 1 2
Results 16 to 20 of 20

Thread: oem 350x connecting rod needed

  1. #16
    bigdaddyvw185's Avatar
    bigdaddyvw185 is offline At The Back Of The Pack Arm chair racerAt the back of the pack
    Join Date
    Mar 2013
    Location
    Seymour CT
    --
    314
    I have dealt with this dealer when i was searching for a 300 kit piston, and they ended up having one sitting on the shelf. I looked up on their website for a 86 350X and it seems that they may have one in stock, (at least it does not say "please call for a price" next to it). Give them a call may be with any luck they have one.
    http://www.collegebikeshop.com/fiche...86&fveh=131333

    Here is their contact page
    http://www.collegebikeshop.com/custo...asp?pg=contact

    I also have heard good things from this honda dealer.
    http://www.westernhillshondayamaha.c...partfinder.htm
    Good luck in the search!!

  2. #17
    ustin666 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Dec 2009
    Location
    moncton
    --
    237
    i am going give them a call tomorrow tanks
    86 350x
    85 125m
    mint 87 250 citation

  3. #18
    Join Date
    May 2013
    Location
    Henderson, Tx.
    --
    977
    Talked to Greg at CWR today, he had called to tell me that my parts are on the way back. While I had him on the phone, I asked him about the quality of the Vesrah rods. He told me that they are equal to OEM rods, and that Vesrah makes many of the rods, valves, valve seals, gaskets, etc... for the manufactures. So, that OEM Honda rod may have been made by Vesrah, for Honda. In all the instances that Vesrah has made a rod for a mfg's particular bike, the mfg will require the bike to be in production for X number of years before Vesrah can market their rod under their name.

    Greg told me that he has used them on the 350x, and not just for a stock rebuild either. Says that he has used them for stroker cranks as well. Has never had an issue with them. He also went on to say, that the Vesrah crank pins press in the crank webs really nice like the OEM pins do, and the bearings have always been good and tight with nice fitment.

    Just a little more info I thought all would appreciate.

  4. #19
    ustin666 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Dec 2009
    Location
    moncton
    --
    237
    could i put the vesrah rod on a new oem honda bearing and pin ?
    86 350x
    85 125m
    mint 87 250 citation

  5. #20
    Join Date
    Oct 2002
    Location
    Northeast
    --
    17,488
    Geez, I hate to speculate; However, with you having the pin and all the bearings I think you may be 100% AOK.

    Worst case, we all learn something; So, I wish you the best and keep us advised or we won't know anymore that what you have learned and or shared.....

    Steve
    DC
    All our government does is distract us while they steal from us, misspend our tax $ and ruin our country

//ArrowChat Integreation Code //