New to the board
Arm chair racerNew to the board
pictures first
So you can see the offset.. oops I think I put the spacers in backwards I didn't even think you could do that, flip flopped the sides ya know.
Second I have one of the weld in 1/4 steel steering stops and I do not see how it can work unless I cut it in half and make it limit the left and right movement by using it in two pieces. does anyone have a picture of one installed?
New to the board
Arm chair racerNew to the board
PS: I used some head bolt washers I had laying around and you wouldn't believe how well the caliper lines up with the rotor!
At The Back Of The Pack
Arm chair racerFirst time rider
A descent piece of steel welded to the head tube on either side in the right spot will work. I welded the whole head tube from an x on mine so I didn't need to fab one.
83 ATC 200E(X) Big Red
My YouTube- http://m.youtube.com/user/mazdarattiman
My bros (hoopster3030) YouTube- http://m.youtube.com/user/hoopster3030
Reply With Quote