Does anyone know if the threads on a honda 200 es flywheel is left hand or right hand threads--I need to know what kind of puller to get.
Thanks for any or all who reply.
New to the board
Arm chair racerNew to the board
Does anyone know if the threads on a honda 200 es flywheel is left hand or right hand threads--I need to know what kind of puller to get.
Thanks for any or all who reply.
At The Back Of The Pack
Arm chair racerFirst time rider
You don't need a conventional puller for the flywheel on this engine. Just a standard, right-hand-thread 14mm x 1.5 thread pitch bolt. I was able to get one at my local ACE Hardware. The bolt threads into the flywheel, and pushes/pulls it off the crank.Originally Posted by doughnuts
New to the board
Arm chair racerNew to the board
Great, I will not have to buy a expensive tool to remove it--Thanks for a cheap fix--RIDE ON.
Reply With Quote