Hello everyone, I've been a member here for a while now, havent posted much, But I had to share this ... I've been a die hard 3 wheeler fan for a long time, I've had 5 200x's, 3 250r's and lots of other ones... But never been able to get my hands on my dream wheeler, a 350x... I found a post on Craigslist for a 350x that someone welded an lt 230 4 wheeler front end on! I talked to the guy for a few weeks and he finally agreed to trade me for my 83 250r, straight up!! Needless to say i will be converting it back!! Lol. The original front end came with it, but the forks were stuck down.. I took them apart and cleaned them, I need to get new seals, boots and oil, and they'll be good to go.. Also, I have a good friend that gave me a frame, swingarm and headlight for painting his 350x tank (and some other parts) before I even got the x, so I'm in the process of gusseting the frame he gave me, I work in a body shop and paint cars , so I'll BC/CC the frame and switch all parts over to that one once its done.. And then All i need is steering stem bearings, and stuff i mentioned for forks. The previous owner also recently rebuilt the motor with a weisco lightweight piston, it has a Barnett clutch, and twist throttle. It came with a plastic tank but id like to get a metal one, so im keeping my eyes open for one in any shape.. As i said I Work in a bodyshop, and ive done quite a few tanks before, so i can restore one if needed.. I dont have a ton of money so this is gonna be a budge build, if anyone could help me out with cheap parts I'd really appreciate it.. And I'm lookin for feedback or any suggestions from you guys thanks for looking! Oh, and I'll post updates and pics as I go along