post stuff that you had to fabricate yourself for your atc please some things should be patented and sold
New to the board
Arm chair racerNew to the board
post stuff that you had to fabricate yourself for your atc please some things should be patented and sold
At The Back Of The Pack
Arm chair racerFirst time rider
I built this back bumper. Its not original, but it looks great and is very strong...
New to the board
Arm chair racerNew to the board
that actually looks more durable than the original ones
Just Too Addicted
Arm chair racerJust too addicted
Rear bumper for ATC90/110 (would love to rebuild an aluminum one for it)
90/110 oil cooler
too many bikes to count. too little time on hand.
At The Back Of The Pack
Arm chair racerFirst time rider
Nice grab bar 350x, looks like a PRM. I have to say you did an excellent job with it.
A little extra clean up on the welds and I would swear it was made in a factory.
84 YTM200E "yamahauler"
85 YTM200
85 KXT250 Tecate
At The Back Of The Pack
Arm chair racerAt the back of the pack
http://www.3wheelerworld.com/showthr...older-for-200x That's my fly rod holder and tacklebox rack
200x build
My Feedback
The world is broken up into two very different groups of people: there are those who like me, and those who can go to hell
At The Back Of The Pack
Arm chair racerFirst time rider
I think so...made from real metal...not alluminum.
Roostin' Away
Arm chair racerRoostin Away
This was on a set of bars I acquired a few years ago.
http://www.3wheelerworld.com/showthr...neck+ingenuity
86 Honda ATC 200X Frankentrike (Project)
80 Honda CB650C Conversion (Project)
3WW Feeback Thread For DasUberKraut
Retired Machines - 02 Honda TRX 300EX, 85 Honda ATC 250SX, 84 Honda ATC 200X Astro Kit, 85 Honda ATC 70, 85 Honda ATC 200 Auto-X, 83 Honda ATC 200E Big Red, 84 Honda ATC 125M (X2), 82 Honda ATC200, 81 Honda ATC 185S, 81 Honda XR250R
New to the board
Arm chair racerNew to the board
what about gun holders i made some out of some chunks of 2x4s and a bungee strap ill try to get pics
Power User
Roostin Away
I wound my own trigger coil for red tecate. Stock was burned up. Measured in at over 100ohms.
My new 1 measures in at 23 ohms. Is also a thicker guage wire. Less likely to burn up. More likely to hurt the cdi lol.
Last edited by RubberSalt; 06-17-2014 at 06:01 PM.
I just wanna go fast. If your not first, your last!!
Reproducing the Tecate CDI. Contact me if you need one. I'm most accessible on FaceBook. You can find me on the 1984-1987 Kawasaki Tecate KXT250 Group.
Reply With Quote
