Hey I wanted to know if there is anyway to make my 200m carb stop leaking.
Got The Holeshot
Arm chair racerJust too addicted
Hey I wanted to know if there is anyway to make my 200m carb stop leaking.
At The Back Of The Pack
Arm chair racerAt the back of the pack
You could start by doing a complete teardown and clean / rebuild it. Where is it leaking from?
The Goal... All I Need Is The Time...
Got The Holeshot
Arm chair racerJust too addicted
I've cleaned it twice now its leaking out of the overflow.
Power User
Roostin Away
Your float needle isn't sealing against the seat. Problems could be:
1. Old crusty hardened rubber tip on the float needle
2. Damaged or dirty seat
3. Float is damaged and not floating or not pushing the needle up correctly
- Frank
1984 200ES Big Red
1985 350X (x2)
1986 350X
1986 250SX
1984 Auto-X
1984 ATC70
1985 ATC70
At The Back Of The Pack
Arm chair racerFirst time rider
As mentioned for some reason the float needle is not seating firmly. Check that the float operates smoothly and freely on the rod that holds it, might be crusty and gunked up. Slide the rod out and scrub with a 3m pad, check the float hinge side also.
Reply With Quote