Results 1 to 7 of 7

Thread: 1984 200 bigred

  1. #1
    Beau is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Aug 2013
    Location
    schertz, tx
    --
    86

    1984 200 bigred

    will a 250 big red motor fit in 200 frame and hook up to the transmision?

  2. #2
    86125m is offline Got The Holeshot Arm chair racerJust too addicted
    Join Date
    Jan 2014
    Location
    La
    --
    1,062
    No I don't think so.

  3. #3
    Join Date
    Feb 2014
    Location
    Victoria,Australia
    --
    878
    no not even close!!
    73 atc 70
    84 ytm 200ern
    79 atc 70
    ytm 225 dr
    atc 90
    80 atc 110
    klt 250A
    84 atc 200es
    85 atc 250es

    gone but not forgotten restored 82 atc 70

  4. #4
    Beau is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Aug 2013
    Location
    schertz, tx
    --
    86
    what about the gas tank from a 250 big red fitting a 200 bigred.

    need a gas tank. my motor runs but i have considered putting another cam in it.

  5. #5
    Join Date
    Sep 2014
    Location
    nevada
    --
    2
    Is 200 big red. The same as a 200s?

  6. #6
    cap's Avatar
    cap is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Jan 2014
    Location
    Nevada
    --
    163
    Quote Originally Posted by zaamcore View Post
    Is 200 big red. The same as a 200s?
    Not exactly, The frame, tires, seat, tank, muffler, fenders, front forks are all different. The S does not have electric start. Big Red has a Hi/Lo tranny,
    Some things would interchange on the engine/carb.

  7. #7
    Beau is offline First Time Rider Arm chair racerNew to the board
    Join Date
    Aug 2013
    Location
    schertz, tx
    --
    86
    Quote Originally Posted by cap View Post
    Not exactly, The frame, tires, seat, tank, muffler, fenders, front forks are all different. The S does not have electric start. Big Red has a Hi/Lo tranny,
    Some things would interchange on the engine/carb.

    is there a carb that i can put on that would be a performance upgrade. looking for a few boltons that will boost power just a bit. i am considering puting the cam from my 200x in it but not till after i get an aftermarket cam for the 200x first.

//ArrowChat Integreation Code //