Results 1 to 3 of 3

Thread: 85r jetting issues

  1. #1
    trikeguy2014's Avatar
    trikeguy2014 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Mar 2014
    Location
    Indiana
    --
    158

    85r jetting issues

    I'm not sure where to go to get best performance out of my R it seems to cut out at about 1/4 to 1/2 throttle in lower gears 1,2,3. Before that it's fine push it past it to wot it's also fine. Also it idles great and never dies
    Other information running 40:1 royal purple, it is smokey probably a little to much, I don't need choke to start it of course it's not cold out yet, always seems to start in 2 or 3 kicks, oem carb main jet 140 needle clips on 2 I believe, stock pipe
    One of the Haspin Locals
    Trikefest 12' 13' 14' 15' 16' 17'

    Trikes owned

    1985 Honda atc 250r - raced by yours truly #27
    1985 Honda atc 250es big red- Dad bought new from Ike's Honda in Richmond Indiana
    1984 Honda atc 200s - raced by Evan Pflum #3

  2. #2
    Join Date
    Jan 2014
    Location
    North Bend, OR
    --
    42
    I think stock needle position is 3, what idle jet?

  3. #3
    trikeguy2014's Avatar
    trikeguy2014 is offline At The Back Of The Pack Arm chair racerFirst time rider
    Join Date
    Mar 2014
    Location
    Indiana
    --
    158
    I would have to look and see I will pull it apart and report back
    One of the Haspin Locals
    Trikefest 12' 13' 14' 15' 16' 17'

    Trikes owned

    1985 Honda atc 250r - raced by yours truly #27
    1985 Honda atc 250es big red- Dad bought new from Ike's Honda in Richmond Indiana
    1984 Honda atc 200s - raced by Evan Pflum #3

//ArrowChat Integreation Code //