//ArrowChat Code
Results 1 to 3 of 3

Thread: Have any of you guys seen this problem before ... TRX250X

  1. #1
    Join Date
    Sep 2002
    Location
    Washingtons Crossing, Pa.
    --
    2,977

    Have any of you guys seen this problem before ... TRX250X

    :evil: ..... well I'm checking out the 250X today and I notice the darn axle shifts from side to side - theres absolutely no up and down (bad bearing) play in it, it just moves about 1/2" left and right. The guy before me put new rear bearings on it about two years ago but theres no miles on them. The axle lock nuts appear to be seated properly and the snap retaining ring is mounted in the groove. I will eventually pull it all apart (yuk no fun) but I can't tell if its a lock nut problem or a bearing carrier problem. Anybody have any ideas before I start.
    J. Jonny D, --- Quad - Trike relations committee Chairman and all around swell guy.

    Rides: '91 Warrior, '87 TW200, 1984 YTM225DX, 1984 ATC125M, '71 CL350 Scrambler

  2. #2
    Howdy's Avatar
    Howdy is offline Putting Priorities in Order, Busier than ever. Catch me if you can
    Join Date
    Sep 2002
    Location
    Celina, Ohio
    --
    10,079
    check your lock nut. It sounds more like that is the problem.

  3. #3
    Join Date
    Sep 2002
    Location
    Clarks Summit PA
    --
    1,236
    i second that howdy'!!

//ArrowChat Integreation Code //