Power User
The day begins with 3WW
I have access to a lot of nice carbs, but they have a flange on one side with 2 bolts that go through it where it bolts to an intake instead of fitting into a boot tube. Does someone have a kit to mount this type of carb? I am honestly trying to swap the stock carb out for a mikuni or kehien type in a 30mm sized carb. this should be a nice upgrade to the stock one even from a 400ex as well as make it easier for tuning and such. Anyway just wondering if someone makes one.
________________
I'm just a squirrel "Trying" to get a nut!
Nearly every kind of Honda ATC (plus some custom ones
several Yami Quads (mostly custom built for MX racing)
https://www.mikesatvfix.com
"Freedom is not free...but the U.S. Marine Corps will pay most of your share."
At The Back Of The Pack
Arm chair racerFirst time rider
most mikunis or keihins are just standard- round that fit into intake tube. the carbs you have must be other machine specific. just sell all those on ebay and pick up a decent 30mm keihin that has the intake side just round to fit into a boot.
http://www.jetsrus.com/carburetor/a_..._selection.htm
Power User
Roostin Away
please post up some pics of the carbs you are talking about
Reply With Quote