Keihin 34mm PJ

[Dustin87R]

Anyone running a 34mm oval slide PJ on their first gen T3? I picked up an 85 with that carb on it and I'm looking for suggestions on where to start with jetting. It's stock except for a Uni filter and the silencer. The 34mm ships with a 152 main and 55 pilot jet but the previous owner replaced them with the largest available and then drilled them out before realizing the intake boot was trash.

[cr480r]

I would start at 160 and creep down as needed.

[Dustin87R]

Thanks for the reply! That gives me an idea of what jets to order.

[nd4speed]

Here is some pages of Keihin carbs jetting specs people used on their TRX250R
http://www.trx250r.net/forum/intake-...-database.html

They say they run like 42-55 pilot and around 152-162 main jet. 3rd or fourth clip position.

I typically try to jet the mid range rich for recreation trail riding, but that's just me.

[Dustin87R]

Thanks for the info! I've got some jets and an intake boot headed my way.